Standard Horizon HX320E Owner's Manual page 32

8. Press the [▲] or [▼] key to select the desired
Bluetooth Headset, then press the [ENTER]
®
soft key.
Pairing will start.
• When pairing is complete, "Connected..."
is displayed.
• The LED on the SSM-BT10 blinks blue.
9. Press the [OK] soft key, then press the [CLR/
operation.
While connected to a Bluetooth
HX320 screen, and the received audio and operation beep will be heard
from the Bluetooth
z Bluetooth headset volume control
®
Adjust the volume of the Bluetooth
button on the HX320 or the volume control operation of the Bluetooth
headset.
z Disable the Bluetooth
To cancel Bluetooth
"OFF" in step 5 above.
z Subsequent Bluetooth
turned ON
• When the power is turned OFF while the Bluetooth
ed, the next time the power is turned ON, the same Bluetooth
is searched for and automatically connected when found.
• If the Bluetooth
screen. If the power of the same Bluetooth
state, it will connect automatically. If not, turn the HX320 and Bluetooth
headset OFF and then ON again.
• To connect to other Bluetooth
paired Bluetooth
Page 30
®
headset.
®
function
®
operation, just repeat the above procedures, selecting
®
headset connection when the power is
®
headset cannot be found, the " " icon flashes on the
®
headsets, refer to the "Connect to another
®
headset".
®
headset, the " " icon appears on the
headset with either the [VOL−] / [VOL+]
®
headset is turned ON in this
®
] key to return to radio
headset is connect-
®
headset
®
®
®