Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha FT25B Owner's Manual

Operation
ECM01640
CAUTION:
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position. For more detailed in-
formation, see page 47.
EMU32722
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever in neutral.
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
40
ZMU02292
3. Push the tilt support knob into the clamp
bracket to support the engine.
EWM00261
WARNING
"
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit or in the
UP
ZMU02823
ZMU02812