Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha F40D Owner's Manual

Operation
2. Place the tilt lock lever in the release po-
sition.
3. Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever toward you or tilt support
knob into the clamp bracket, and then
place the tilt lock lever back into the lock
position to support the outboard motor.
ECM01640
CAUTION:
Do not use the tilt support lever or knob
50
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position. For more detailed in-
formation, see page 58.
EMU32721
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
ZMU03636
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
ZMU03637
N
ZMU03196
"