Specifications - Makita 6280D Instruction Manual

ENGLISH
1. Button
2. Battery cartridge
3. Switch trigger
4. Reversing switch lever
5. Low speed

SPECIFICATIONS

Model
Capacities
-1
No load speed (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Explanation of general view
6. High speed
7. Speed change lever
8. Graduations
9. Adjusting ring
10. Drill marking
Steel
Wood
Wood screw
Machine screw
High
)
Low
6260D 6270D
10 mm
21 mm
5.1 mm x 38 mm
192 mm
1.4 kg
D.C. 9.6 V D.C. 12 V
END004-4 2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
ENE034-1
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
GEA006-2
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
11. Pointer
12. Sleeve
13. Ring
14. Tighten
6280D
25 mm
5.1 mm x 63 mm
6 mm
0 - 1,200
0 - 350
1.5 kg 1.6 kg
D.C. 14.4 V
6390D
13 mm
36 mm
6 mm x 75 mm
220 mm
2.1 kg
D.C. 18 V
3