Cisco C1109-2PX Upgrade page 18

Install a Micro-SIM Card into a USB LTE Dongle
Table 1: Port Mappings for 5G-ANTM-0-4-B on P-5GS6-GL and P-LTEAP18-GL PIMs
5G-ANTM-O-4-B
MAIN 0
(LTE1)
MAIN 1
(LTE3)
DIV 0 (LTE2)
DIV 1 (LTE4)
GNSS
The following link contains the antenna specifications and installation instructions for 5G NR
(5G-ANTM-O-4-B):
https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing-combined/
b-cisco-industrial-routers-and-industrial-wireless-access-points-antenna-guide/m-5g-antm-04b.html#Cisco_
Generic_Topic.dita_e780a6fe-fa46-4a00-bd9d-1c6a98b7bcb9
Install a Micro-SIM Card into a USB LTE Dongle
This section describes how to insert a micro-SIM card into a USB LTE dongle in a C1101-4P router.
Figure 9: Micro-SIM Card Slot with Dust Cover
Step 1
To insert a micro-SIM card into a USB LTE dongle, do these steps:
a. Tap open the micro-SIM protective cap on the USB dongle, gently insert the micro-SIM card with its edge oriented
as shown in the figure until the SIM is seated in the socket.
b. Tap close the micro-SIM protective cap on the USB to close the slot.
Install and Upgrade Internal Modules and Field Replaceable Units
18
P-LTEAP18-GL P-5GS6-GL
Main 0 ANT 0
Main 1 ANT 1
DIV 0 ANT 2
DIV 1 ANT 3
No GPS
connection
Install and Upgrade Internal Modules and Field Replaceable Units