Table of Contents
Advertisement
Troubleshooting
You can take various steps to diagnose and solve problems that you might encounter.
The first step in troubleshooting your PowerLINE adapter is to check the LEDs. After you plug in the PowerLINE
device, the following sequence of events occurs:
1.
The Power LED lights.
2.
After approximately 10 seconds, verify the following:
•
The Power LED is solid green. The device is powered on.
•
If the device is connected to a PowerLINE network, the Pick A Plug LED is lit.
•
If the PowerLINE device is connected through the Ethernet port to a powered-on Ethernet device, the
Ethernet LED is lit.
If no LEDs are lit, see
If the Power LED is not lit, see
If the Power LED is amber, see
If the Pick A Plug LED is not lit, see
If the Ethernet LED is not lit, see
If you do not find the solution here, visit the NETGEAR support site at
contact information.
LEDs Are Off When the PowerLINE Device Is Plugged In
Power LED Is Off
Power LED Is Amber
Pick A Plug LED Is Off, Amber, or Red
Ethernet LED Is Off
on page 23.
on page 23.
on page 24.
support.netgear.com
22
on page 23.
on page 23.
for product and
3
Advertisement
Table of Contents
