1. Remove these parts in order, if any:
• "Left side cover" on page 54
• "Side fan with bracket" on page 55
2. Disconnect the power supply assembly cables from the system board.
Removal steps
Step
Screw (quantity)
1
#6-32 × 5 mm, Nickel coated (4)
Wi-Fi card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove "Left side cover" on page 54.
Torque
5.0 ± 0.5 in-lb
.
Chapter 7
Hardware removal and installation
87