Front-Access Storage Enclosure - Lenovo 30GS001AGE Hardware Maintenance Manual

Front-access storage enclosure

Notes:
• Some computer models might not be shipped with a front-access storage enclosure. In this case, there
will be a dummy bezel on the front bezel.
• Before removing an old storage drive, safely eject the old storage drive from the operating system first.
For more information, see the operating system help system.
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, remove these parts in order:
• "Left side cover" on page 54
• "Storage drive in the front-access storage enclosure" on page 62
66
P3 Tower Hardware Maintenance Manual