Table of Contents
Advertisement
2)
Press qw to switch the settings.
f When set to [AUTO], the built-in angle sensor detects the orientation of the projector and automatically
switches to [FRONT/DESK] or [FRONT/CEILING]. Normally, set to [AUTO].
f To project from the rear of the screen, select [REAR/DESK] or [REAR/CEILING] (using a translucent
screen).
Setting [SCREEN FORMAT] and [SCREEN POSITION]
Set the screen aspect ratio and display position according to the screen being used. When the initial setting is
complete, you can change the setting from the [DISPLAY OPTION] menu → [SCREEN SETTING] → [SCREEN
FORMAT]/[SCREEN POSITION].
1)
Press as to select the [SCREEN FORMAT].
2)
Press qw to select the aspect ratio.
3)
Press as to select the [SCREEN POSITION].
f When [SCREEN FORMAT] is set to [16:10], the [SCREEN POSITION] cannot be changed.
f When [SCREEN FORMAT] is set to [16:9] or [4:3], proceeds to Step 4).
4)
Press qw to select the image position.
f Select from [CENTER]/[HIGH]/[LOW] or [CENTER]/[LEFT]/[RIGHT].
Setting [STANDBY MODE]
Set the operating mode at standby. When the initial setting is complete, you can change the setting from the
[PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE].
1)
Press as to select [STANDBY MODE].
2)
Press qw to select the operation mode.
f The factory default setting is [NORMAL], which enables the network function even in standby mode.
f To lower the power consumption level during standby, set to [ECO].
When the administrator account setting screen is displayed
When the projector is switched on for the first time after purchase, the focus adjustment screen is displayed
after the projection starts, followed by the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT]
screen. When the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is executed, the focus adjustment screen is
displayed after the projection starts, followed by the [INITIAL SETTING] screen. When the [NETWORK] menu →
[INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT] screen is displayed after the projection starts next
time.
To use the network function of this projector, set the user name and password of the administrator account. You
can also set it later from the [NETWORK] menu → [ADMINISTRATOR ACCOUNT].
[PASSWORD POLICY]
Displays the policies about the password for the administrator account.
1)
Press as to select [PASSWORD POLICY], and press the <ENTER> button.
f The [PASSWORD POLICY] screen is displayed.
f Pressing the <MENU> button or the <RETURN> button can return to the [ADMINISTRATOR ACCOUNT]
screen.
48 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector
ADMINISTRATOR ACCOUNT
PASSWORD POLICY
USER NAME
PASSWORD
PASSWORD CONFIRM
STORE
Please set the user name and password.
could not use the Web Control function
and for communication control via a LAN
(including Panasonic application software).
SELECT
dispadmin
if not set,
RETURN
ENTER
RETURN
Advertisement
Chapters
Table of Contents
