Table of Contents
Advertisement
About this Reference
This manual documents the control and measurement functions provided for the remote interface to R-2680
Communications System Analyser with the MIT1327 option. This reference is intended to be used as an
addendum to the R-2600 Programming Reference. These two documents should provide all the information
necessary to develop application pro_- to remotely control MPT 1327 operations in an R-2680 unit. General
usage of the R-2680 anaiyser is described in the Operator's Manual, publication 68B80386B72.
The MPT13.27 Programming Reference details specific commands needed for the MIT1327 option. Refer to the
R-2600 Progr amming Reference for general information about utilising the remote interface of the R-2600.
A unique feature of the R-2680 is the capability, under remote control, of modifying user selections without
seeing the selections change on the R-2680 screen. This scenario occurs
parameter when in a screen that does not display that parameter. This will only be allowed to happen when the
remote user is in the MPT Test Mode.
Also note that the "Non-Numeric Program Data" and the "Hexadecimal Response Data" are not to the IEEE488.2
values, not decimal.
whenever' the
remote user modifies a
Motorola Communications Anaiyser
Advertisement
Table of Contents
