Download
Share
Print this page
Makita M6901D Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. M6901D
  6. Instruction manual
Makita M6901D Instruction Manual

Makita M6901D Instruction Manual

Cordless impact driver
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Impact Driver
M6901D
Read before use.

Advertisement

loading

Related Manuals for Makita M6901D

Summary of Contents for Makita M6901D

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver M6901D Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: M6901D Fastening capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm No load speed 0 - 2,400 min Impacts per minute 0 - 3,000 min...
  • Page 3 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
  • Page 4 Hold the power tool by insulated gripping sur- faces, when performing an operation where the CAUTION: Only use genuine Makita batteries. cutting accessory may contact hidden wiring. Use of non-genuine Makita batteries, or batteries that Cutting accessory contacting a "live" wire may have been altered, may result in the battery bursting make exposed metal parts of the power tool "live" causing fires, personal injury and damage. It will also and could give the operator an electric shock.

  • Page 5: Functional Description

    Tips for maintaining maximum Battery protection system battery life The tool is equipped with a battery protection system. Charge the battery cartridge before completely dis- This system automatically cuts off power to the motor to charged. Always stop tool operation and charge the extend battery life. battery cartridge when you notice less tool power. The tool will automatically stop during operation if the tool and/ Never recharge a fully charged battery cartridge. or battery are placed under one of the following conditions: Overcharging shortens the battery service life.
  • Page 6 Procedure 1 CAUTION: Always check the direction of rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam- age the tool. CAUTION: When not operating the tool, always set the reversing switch lever to the neu- tral position.

  • Page 7: Operation

    Proper fastening torque for high tensile bolt OPERATION . N m (kgf.cm) NOTICE: Do not cover vents, or it may cause overheating and damage to the tool. 1. Fastening time (second) 2. Fastening torque Hold the tool firmly and place the point of the driver bit in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. NOTICE: If you use a spare battery to continue the operation, rest the tool at least 15 min.

  • Page 8: Maintenance

    NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885489C936 www.makita.com 20170927...