Switching The Xm Display; Storing And Recalling Broadcast Stations; Switching The Xm Channel Select Mode; Selecting A Channel In The Channel Category - Pioneer AVIC-D2 Operation Manual

1
Touch the source icon and then touch
"XM" to select the XM.
2
Touch "BAND" to select a XM band.
Touch "BAND" repeatedly until the desired
XM band is displayed: XM1, XM2 or XM3.
3
To perform tuning, touch
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
If you keep touching
increase or decrease channel number contin-
uously.
You can also perform manual tuning by mov-
ing the joystick left or right.
You can also perform tuning within selected
channel category.
➲ Selecting the channel in the channel cate-
gory ➞ Page 87

Switching the XM display

1
Touch .
Each touch of changes the information as
follows:
Channel name — Artist name/feature —
Song/program title — Channel category
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1 —
P6 you can easily store up to six broadcast sta-
tions for later recall with the touch of a key.
1
When you find a station that you want to
store in memory keep touching a preset
tuning key P1 — P6 until the XM preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key P1 — P6 the station is recalled from
memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
❒ Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
• Using  or  in the detail information display
• Moving the joystick up and down when the
or .
Switching the XM channel
select mode
You can switch if you select a channel with a
or , you can
channel number or within a selected category
when you select a channel.
1
Selecting a channel in the chan-
nel category
1
2
3

Selecting a XM channel directly

➲ Refer to page 84

Display the Radio ID

➲ Refer to page 85
❒ You can also use the following operations
to recall stations assigned to preset tuning
keys P1 — P6.
when the "CH NUMBER" mode is selected.
"CH NUMBER" mode is selected.
Touch "MODE" to select the desired
channel select setting.
Touch "MODE" repeatedly to switch between
the following channel select settings:
CH NUMBER (channel number select mode)
— CATEGORY (channel category select
mode)
Touch "MODE" to select the CATEGORY
mode.
Touch  or  to select the desired chan-
nel category.
Touch or
channel in the selected channel category.
❒ You can also perform steps 2 and 3 by
using the joystick.
to select the desired
87