Table of Contents
Advertisement
Quick Links
HydroTap G4
User Manual
Tap Operation..................(Pages 3-11)
•
LCD Screen & Menu .......(Pages 12-26)
•
Maintenance.................... (Pages 26-29)
•
Home Menu Icons............(Page 30)
•
Contact details.................(Page 32)
•
Date of Installation............./......../.........
Affix Model Number Label
For safe keeping store this book
in the inside door pocket
802006NZ - HT-BCS; BCSH A-AV User Manual - Mar 2016 - v3.00
BCS Residential
Here
802006NZ
®
Page 1 of 32
Advertisement
Table of Contents
Related Manuals for Zenith 802006NZ
Summary of Contents for Zenith 802006NZ
- Page 1 Contact details....(Page 32) • Date of Installation...../../..BCS Residential Affix Model Number Label Here 802006NZ For safe keeping store this book in the inside door pocket 802006NZ - HT-BCS; BCSH A-AV User Manual - Mar 2016 - v3.00 Page 1 of 32...
- Page 2 Notes Page 2 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 3 Elite lights will flash, momentarily. To control the safety (From the touch screen): (See page 25) Elite Tap For Hot Isolation: Not for HydroTap Arc/Cube, (see page 25) 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 3 of 32...
- Page 4 The final temperature will be dependant on the temperature of the incoming cold water. For convenience, the spout may be swivelled, left or right through 120°. Page 4 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 5 RED mark, the temperature is increased. The final temperature will depend on the temperature of the incoming cold water. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 5 of 32...
-
Page 6: Tap Operation
BLUE. Rotating the control, when the indica- tor light is BLUE, allows the dispensing of chilled water. Select button Arc/Cube Tap Page 6 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00... - Page 7 RED light flashes (This will flash for aprox 2 seconds). Boiling water may be dispensed by rotating the control while the RED light is flashing. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 7 of 32...
- Page 8 When unattended, the control light will automatically default to the Chilled (BLUE) mode after 30 seconds. Safety Lock Arc/Cube Tap Page 8 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
-
Page 9: Tap Lights
When the indicator light flashes fast and continuous, a system fault has occurred. Check for details on the faults screen. If unable to rectify, call a qualified service agent. Elite Tap 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 9 of 32... - Page 10 All three tap lights (Safety; Select and Select light Indicator light) will flash every 10 seconds, indicating a Filter change is required. Safety Light Page 10 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 11 The unit will calibrate the safety switch Return the levers to the neutral position. To check the calibration, dispense Boiling water, in normal light conditions with the safety enabled. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 11 of 32...
-
Page 12: Lcd Screen
Note: When selecting Menu options, the screen will revert to the main menu, if the screen remains inactive for a period, in excess of 10 seconds. Page 12 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00... -
Page 13: Lcd Screen Menu
• Filter Life • Energy Settings (Months) Modes • Sleep Mode • Safety Options • Dispense • Safety Lock Times • Hot Isolation • Hot/Cold Dispensing 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 13 of 32... - Page 14 Press [<=] button for the previous menu Press [Recent Fault Log] to view the last recorded faults Press [<=] button for the previous menu Page 14 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 15 [Home] to return to the home screen. LCD Screen operation - Section C Install Once your Zenith HydroTap G4 unit has been installed, Go to Install menu to configure the system settings for your product. Sub menu: 1 - Filter Flush...
- Page 16 Position CLOSED Position The Zenith HydroTap allows the user to adjust the filter life and to edit the filter usage. (See filter details on Page 22 ). 2. - Filter Reset After replacing the filter, the counters should be reset Press the [MENU] button for main menu.
- Page 17 5. Check for correct tap operation by selecting ‘Lux Sensor-> OFF’. When the room is darkened (below the calibrated light level), the tap lights will turn OFF after aprox 30 seconds. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 17 of 32...
- Page 18 3. Press [Reset] to power down and restart the system. This is useful if you need to reset a password in section E or in section G. Page 18 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 19 LCD Screen operation - Section E Security The Zenith HydroTap G4 allows the appliance coordinator to set up a pass- word to protect against users changing the preferred system settings. When activated, the password will be necessary to access the Settings and Comms areas.
- Page 20 You will need to enter your pass- word to access the settings screens. If you have forgotten the password, please refer to section E. Page 20 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 21 Home screen. Set Temperature Zenith HydroTaps are designed to operate within 1ºC to 2ºC of set point for boiling water and between 3ºC to 5ºC for chilled drinking water. All boiling water units are self calibrating to 98ºC, which is the recommended setting.
- Page 22 To edit, select Edit Usage(Litres) or Edit Usage (Months), then adjust using the up or down arrows. Press [HOME] to return to the Home screen. Page 22 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 23 4 Lux sensor options from the sleep mode menu. Before commencing, ensure there are ‘Normal to Dim’ (Not Dark) operating light conditions. Note: Refer to section C6 on Page 16 for calibration procedure 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 23 of 32...
- Page 24 Note: Any attempt, during OFF mode, to dispense water, will bring the unit out of energy mode. The system will revert to the energy mode setting after 30 minutes of non use. Page 24 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...
- Page 25 • If the Hot Isolation is not re-enabled, it will be automatically re-enabled after 30 seconds of inactivity. Hot Isolation - Not available for the HydroTap Arc/Cube Tap. Note: Do not enable this function for the HydroTap Arc/Cube. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 25 of 32...
-
Page 26: Filter Maintenance
(e.g. More than a weekend), run water through the chilled water outlet for at least 5 minutes before consumption. Page 26 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00... - Page 27 Filter Maintenance Water Filter The Zenith HydroTap notifies when filter replacement is due. If you notice one of the following, you will need to change the filter: • The Change Filter light will flash white once a second and remain so until reset.
- Page 28 Filter Maintenance Air Inlet Filter The Zenith HydroTap air filter is conveniently located on the outside of the condenser. The filter screen is a sliding fit in the plastic housing on the side of the under sink unit. The screen may be removed for cleaning, by sliding it forward.
- Page 29 Under sink units must never be located near, or cleaned with water jets. Avoid using airborne pesticides near the undersink unit. 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 29 of 32...
-
Page 30: Home Menu Icons
98°C Chilled Temperature The set temperature of the water in the Chiller tank will be displayed. This is will range from 3-5°C CHILLED 3-5°C Page 30 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00... - Page 31 Notes This user manual has been written according to firmware version B02.4. Please check the following website for the latest user manual: https://www.zenithheaters.co.nz/” 802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00 Page 31 of 32...
-
Page 32: Contact Details
AU675601, AU637412, AU635979, GB0422305, GB2065848, US4354049, US5103859, US5099825 and SA2006/08043. Other patents are in force and patent applications are pending. Page 32 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00...