Print Fabric Roll From Your Computer; Print From Windows - Brother HL-JF1 Quick Reference Manual

Print Fabric Roll from Your Computer

For detailed instructions for printing onto paper (A4, Letter, etc.), refer to the Online User's Guide at https://s.brother/
cm2aa/.

Print from Windows

When you print from [Print Test Page] on your computer,
your machine may print on Fabric roll. To print on paper,
make sure you select [Cut-Sheet Paper] in the [Media
Selection] field of the printer driver.
a
Make sure you have loaded the Fabric Roll in Tray
#2.
b
Select the print command in your application of
choice.
c
Select your model's name, and then click the
printer's properties or preferences button.

The printer driver window and then [Fabric Roll
Settings] window appear.
(If the [Fabric Roll Settings] window does not appear,
click the [Basic] tab in the printer driver window and
then select [Fabric Roll] in the [Media Selection]
field.)
<[Fabric Roll Settings] window>
a. Click the [Page Size] drop-down list, and then select
[User Defined].
b. Enter the width and height of the document created in
your application.
• If the page size created in your application is not the same
as the actual print size, enter the page size.
c. Select the [Save size as] checkbox and then enter a
name you want to use for the size you just defined in
the previous step.
d. Click [OK] to apply your page size settings.
d
Click [Print Quality] drop-down list, and then
select the print resolution you want. Because the
print quality and speed are related, the higher the
quality, the longer it will take to print the
document.
e
Click the [Scaling] drop-down list, and then select
the option to enlarge or reduce the page size, if
needed.
Select this option to fit the page size on the actual print
size.
f
Change the other printer settings, if needed.
g
Click [OK].
h
If the instruction window for loading the Fabric
Roll appears, follow the information provided, and
then click [OK].
i
Complete your print operation.
NOTE
• When printing long page (more than 54.33") the machine
prints part of the page and the rest will be blank depend
on the application you use.
To resolve it, set the printer driver as follow;
Select [Advanced] tab, click [Other Print Options] > [Input
Resolution] and then select the checkbox. Note that if you
select this option, it takes longer to start printing and the
print quality is adversely affected by the low resolution.
IMPORTANT
• Check the remaining amount of Fabric Roll before
printing. If the remaining amount of Fabric Roll is not
enough for the page length you want to print, the machine
may stop printing in the middle. Even if the remaining
amount of Fabric Roll is enough to fit your print job, the
machine may leave a blank at the end of the print result.
14