Other Programming Selections - Honeywell YOUJIE YJ-HH360 User Manual

Step 3. Terminal Type
Refer to the Supported Terminals Chart
minal ID number for your PC. Scan three numeric bar codes on the
Programming Chart
terminal ID (you must enter 3 digits). For example, scan 0 0 3 for an AT
wedge.
Note: The wildcard for all terminal types is 099.
Step 4. Code I.D.
In Appendix A
format. Locate the Hex value for that symbology and scan the 2 digit
hex value from the
manual.
Step 5. Length
Specify what length (up to 9999 characters) of data will be acceptable
for this symbology. Scan the four digit data length from the
ming Chart
is entered as 0050. 9999 is a universal number, indicating all lengths.)
Step 6. Editor Commands
Refer to the Format Editor Commands Chart
symbols that represent the command you want to enter.
Step 7. Scan Save from the
manual to save your entries.
Enter Data Format
Discard

Other Programming Selections

• Clear One Data Format
This deletes one data format for one symbology. Scan 0 from the
Programming Chart
5 - 2
inside back cover to program the scanner for your
find the symbology to which you want to apply the data
Programming Chart
inside the back cover of this manual. (Note: 50 characters
Programming Chart
inside the back cover of this manual to indicate you are
(page 5-4) and locate the Ter-
inside the back cover of this
(page 5-4). Scan the
inside the back cover of this
Save
Program-