uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory
Button 2
Memory
Button 1
SET Button
■
Recalling the Stored Position
Memory
Button 2
Memory
Button 1
206
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
You will hear the beeper, and the
u
memory button indicator light will blink.
3. Press the memory button
1 or
(
five seconds of pressing the SET button.
u
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear two beeps.
1. Put the transmission into
(
P .
2. Apply the parking brake.
3. Press a memory button (
1 or
(
u
You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.
*
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the two
beeps.
•
You set the power mode to any position except
2 within
(
ON.
1Recalling the Stored Position
The seat will stop moving if:
•
The vehicle speed is above 2 mph (3 km/h).
•
You press the SET button or memory button
2 ).
(
.
(
2
•
You adjust the seat position.
or
(
1