Table of Contents
Advertisement
4. Screw the cover back to the camera when installation is finished.
2.2 Direct Mounting
Steps:
1. Drill 4 screw holes (hole 1 on drill template) and the cable hole in
the ceiling/wall.
1:Screw Hole for
2. Fix the camera to the wall/ceiling with the supplied screws.
Note:
Please insert the expansion screws first if the camera is mounted
to the cement wall/ceiling. And you can use the self-tapping
screws directly if camera is mounted to the wooden wall/ceiling.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Network Bullet Camera·Quick Start Guide
2
Ceiling Mounting
1
2
Bracket
1
2
Figure 2-3 Drill Template
1
2
2:Screw Hole for
Mounting Base
1
15
Cable Hole
Advertisement
Table of Contents
