Additional Information; Troubleshooting; Specifications - Sony R-D-S EON ST-SE700 Operating Instructions Manual

Additional Information

Troubleshooting

If you experience any of the
following difficulties while using
the tuner, use this troubleshooting
guide to help you remedy the
problem. Should any problem
persist, consult your nearest Sony
dealer.
There's no sound.
, Connect the aerials.
, Set the source setting on
the amplifier to TUNER.
You cannot tune in a frequency.
, Adjust the position of the
aerial.
, Connect an external aerial
for FM broadcasts.
, Set IF BAND to NARROW
(ST-SE700 only).
, Preset the stations again if
you've moved.
There is severe hum and/or
background noise.
, Adjust the position or
direction of the aerial.
, Tune to a correct
frequency.
, Connect an external aerial
for FM broadcasts.
, Move the tuner away from
the source of the noise.
RDS isn't working.
, Make sure that you are
tuned to an FM station.
, Select a stronger FM
station.
"No preset" appears in the display.
, If the mains lead is
disconnected from the wall
outlet for more than one
month, the memory is
erased. Preset stations
again.
The station was interrupted by
another station / The tuner
automatically starts searching
stations (ST-SE700 and ST-SE500
only).
, The EON function is
working. Turn off EON
when you don't want the
current programme
interrupted.
The appropriate display or
information does not appear.
, Turn the power off. Press
and hold AUTO-BETICAL
SELECT and the 5 button
and press POWER to turn
the power back on. This
empties any frequencies
stored in the preset
memory and returns the
display to the default
language (English).
, Contact the radio station
and find out whether or
not they actually provide
the service in question. If
so, the service may be
temporarily out of order.

Specifications

FM tuner section
Frequency range 87.5 - 108.0 MHz
Aerial terminals
75 ohms,
unbalanced
Intermediate frequency
10.7 MHz
Sensitivity ST-SE700/500
at 26 dB quieting
(mono) 10.3 dBf,
0.9 µV/75Ω
at 46 dB quieting
(stereo) 38.5 dBf,
23 µV/75Ω
ST-SE300
at 26 dB quieting
(mono) 18.0 dBf,
2.2 µV/75Ω
at 46 dB quieting
(stereo) 40.0 dBf,
24.5 µV/75Ω
Usable sensitivity (IHF)
10.3 dBf, 0.9 µV/
75Ω
at 40 kHz deviation
S/N
ST-SE700:
80 dB (mono),
76 dB (stereo)
ST-SE500/300:
74 dB (mono),
69 dB (stereo)
ST-SE700:
Harmonic distortion
WIDE
0.04 % (mono),
0.05 % (stereo)
NARROW
0.06 % (mono),
0.08 % (stereo)
ST-SE500:
0.1 % (mono),
0.2 % (stereo)
ST-SE300:
0.2 % (mono),
0.3 % (stereo)
ST-SE700:
Frequency response
30 Hz - 15 kHz
(+0.3/–0.7 dB)
ST-SE500:
30 Hz - 15 kHz
(+0.5/–1.0 dB)
ST-SE300:
30 Hz - 15 kHz
(+0.3/–2.0 dB)
ST-SE700
Separation
50 dB at 1 kHz
ST-SE500
40 dB at 1 kHz
ST-SE300
38 dB at 1 kHz
Selectivity ST-SE700
at 400 kHz
WIDE 80 dB
NARROW 90 dB
at 300 kHz
WIDE 45 dB
NARROW 70 dB
ST-SE500/300
at 400 kHz
80 dB
at 300 kHz
60 dB
Output
ST-SE700/500
at 40 kHz deviation
600 mV
ST-SE300
at 40 kHz deviation
400 mV
AM tuner section
Frequency range MW: 522 - 1,611 kHz
(9 kHz step)
LW: 144 - 288 kHz
(1 kHz step)
Intermediate frequency 450 kHz
GB
15