Organizing The Preset Stations - Sony R-D-S EON ST-SE700 Operating Instructions Manual

Advanced Tuner Operations

Organizing the Preset Stations

This tuner makes it easy to arrange preset stations in
the order you prefer. You can arrange all the preset
stations automatically, according to alphabetical order,
signal strength, country code, or tuner band, or you
can use the "Move" and "Erase" functions to move and
erase specific preset stations.
1
Press MENU.
2
Turn TUNING/SELECT until "Edit" appears in
the display and press ENTER.
If no stations have been stored as presets, "No
Preset" appears in the display.
3
Turn TUNING/SELECT to choose one of the
following sorting methods:
Choose
Move
Erase
Alphabet
Strength
Country
Band
4
Press ENTER.
The tuner sorts the stations, then returns to
normal tuning mode and receives preset station
A1.
Note
Some countries use the same country code, and the stations
from these counties may be arranged together.
GB
12
TUNING/SELECT
MENU
To
change the location of a specific preset (see
below).
erase a specific preset (see below).
sort preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.
sort preset stations in order of their signal
strength (FM stations only).
MW and LW frequencies are arranged by
frequency.
sort FM RDS stations with PI information
alphabetically by country.
Other stations are arranged by frequency.
sort preset stations in order of their
frequency band (FM - MW - LW).
Moving preset station
You can also move a specific preset station.
1
Follow steps 1 through 3 in "Organizing the
Preset Stations" and choose "Move" from the Edit
menu, then press ENTER.
2
Turn TUNING/SELECT so that the preset code
you want to move appears in the display and
press ENTER.
3
Turn TUNING/SELECT to select the new location
for the preset code and press ENTER.
The preset station you selected is moved to the
new location and the other preset stations in that
group ("A" for example) shift backwards to make
ENTER
room for the new preset.
EXAMPLE:
If you move A4 to A1.
Preset
Frequency
Preset
Frequency
Erasing preset stations
You can erase preset stations one by one.
1
Follow steps 1 through 3 in "Organizing the
Preset Stations" and choose "Erase" from the Edit
menu, then press ENTER.
2
Turn TUNING/SELECT so that the preset code
you want to erase appears in the display and
press ENTER.
The preset station you selected is erased from the
preset memory and the other preset stations in
that group ("A" for example) shift forward to fill
in the blank space.
EXAMPLE:
If you erase A1.
Preset
Frequency
Preset
Frequency
z
If you want to erase all the preset stations
1 Turn off the power
2 While holding down the number 5 button and
AUTO-BETICAL SELECT, press POWER to turn on
the power.
A1 A2 A3 A4 A5 A6
89.5 94.5 96.5 98.0 100.5 103.0
.
A1 A2 A3 A4 A5 A6
98.0 89.5 94.5 96.5 100.5 103.0
A1 A2 A3 A4 A5 A6
89.5 94.5 96.5 98.0 100.5 103.0
.
A1 A2 A3 A4 A5 A6
94.5 96.5 98.0 100.5 103.0 104.5
A7 A8
104.5 106.0
A7 A8
104.5 106.0
A7 A8
104.5 106.0
A7 A8
106.0