Husqvarna HTC 400 Operator's Manual page 3

Product overview
1
20
22
1. Operator's manual
2. Handle/Handlebar
3. Lock knobs for handlebar adjustment
4. Emergency stop
5. Overload lamp
6. ON/OFF switch
7. Hour meter
8. Electrical enclosure
9. Connection for motor cable
10. Counterweights
11. Angle joint handle
12. Power plug
13. Rubber wheels
14. Lock function
15. Lock bolt to attach the motor/grinding head
16. Grinding head cover
17. Lift handle, motor
18. Electric motor
19. Lifting eye
20. Brush strip
21. Tool plate
926 - 002 - 13.12.2018
7
21
12
13
2
8
9
19
14
15
22. Connection, vacuum hose
Symbols on the product
WARNING: Not careful or incorrect use can
result in injury or death to the operator or
others.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Always put on hearing protection, eye
protection and breathing protection.
WARNING! The dust can cause breathing
problems. Use breathing protection. Do not
breathe exhaust fumes. Always make sure
that there is good airflow.
4
5
6
3
18
17
16
3
3