Final Drive Oil - Honda Deluxe 2014 Manual

Final Drive Oil

Checking the Final Drive Oil
1. 50 STATE (meets California)
Hold the motorcycle upright on firm level
ground.
Canada model
Place your motorcycle on its center stand
on a level surface.
2. Remove the oil fill hole cap and O-ring.
3. Check the oil level. It should be flush with
the lower edge of the oil fill hole.
O-ring
110
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
(
the opening.
1. Pour the final drive oil into the oil fill hole
2. Install a new O-ring onto the oil fill hole
Lower edge
Oil fill hole cap
P. 81) until it reaches the lower edge of
2
until it reaches the lower edge of the
opening.
u Do not over fill above the lower edge of
oil fill hole.
u Make sure no foreign objects enter the
oil fill hole.
u Wipe up any spills immediately.
cap. Tighten the oil fill hole cap.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)