Power Supply; Overview; Top View; Front View - Philips PicoPix Max One PPX520 User Manual

Table of Contents

Advertisement

Power supply

Use only a power adapter which is certified for
this product (see Technical data, page 18).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
The capacity of the built-in battery diminishes
with time. If the product functions only with AC
power supply, the built-in battery is defective.
Contact an authorised service centre to replace
the built-in battery.
CAUTION!
Always use the
projector off.
Turn off the product and unplug from the
power outlet before cleaning the surface
(see Cleaning, page 15). Use a soft, lint-
free cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.
DANGER!
Risk of eye irritation!
This product is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens
during operation. This could cause eye
irritation or damage.

Overview

button to turn the
2 Overview

Top view

Max One
a b c d d
LED indication
a
b
Return to a previous menu screen.
c
Navigate menu options�
Decrease volume.
d
Navigate menu options�
Increase volume.
e
Access the settings menu.
Confirm a selection or entry.

Front view

a
b
Projection lens
a
Focus camera
b
Adjust image sharpness.
OK
5

Advertisement

Table of Contents
loading

Table of Contents