Table of contents Introduction �������������������������������������������������3 7 Service �������������������������������������������������� 15 Dear customer ...............3 Built-in battery care ..........15 About this user manual ..........3 Cleaning .................15 What’s in the box ............3 Update software ............15 Customer service centre ..........3 Troubleshooting ............16 General safety information ��������������� 4 8 Appendix ����������������������������������������������18 Setting up the product ..........
You can find the support hotline in the warranty DANGER! card or online: Web: www.philips.com/support Danger of personal injury! Mail: philips.projector.eu@screeneo.com This symbol gives warning of danger of personal injury. Physical injury or...
The product has built-in battery. Do not product. dissemble and modify. The built-in battery Do not remove the type label from this product, should be replaced by qualified service staff as this will void the warranty. only. Philips · PicoPix Max One...
2 Overview Power supply Use only a power adapter which is certified for this product (see Technical data, page 18). Top view Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.
Charge a USB-C device like a Return to a previous menu screen. smartphone. Navigation buttons Navigate menu options. Connect to the power supply. Press and hold for one second to switch the projector on or off. Philips · PicoPix Max One...
3 Connect USB-C connection for image projection Notice Connect a USB-C device (e.g. a mobile phone, You need to connect the projector to tablet or laptop) to the projector through USB-C an HDMI or USB-C device, so that the connection. With this connection, images are projection screen can show images.
Charge the projector for 1.5 hours before first use. Charge the projector when the low battery icon appears in the projection screen. • To charge the projector, connect the projector to an external power supply as Notice Philips · PicoPix Max One...
Image focus adjustment When using the remote control, point the remote control at the IR sensor located Press on the remote control to turn focus on the back of the projector, and make adjustment on, then press / on the remote sure there is no obstacle between the control to adjust image clearness.
Keystone Calibration. Front ceiling Mount the projector on the ceiling with upside up in front of the projection screen. A projector mount is required to mount the projector on ceiling. Philips · PicoPix Max One...
5 Other features Listen through external speakers or headphones Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external To adjust projection to the correct position, speakers or headphones. press on remote control to access the DANGER! settings menu, then navigate to select Proj.
USB-C Charger - On. The USB-C device starts to charge automatically. To deactivate charging of a USB-C device, select USB-C Charger - Off. Philips · PicoPix Max One...
6 Change settings • USB-C: Select it when a USB-C device is connected. This section helps you change the settings of You need to select a correct input source, the projector. so that the projection screen can show When the projector is turned on, press images.
If the projector does not function normally, reset the projector to the default settings. It will delete all the current settings. • Navigate to Full Reset, and press OK, then follow on-screen instructions to complete resetting. Philips · PicoPix Max One...
The latest software of the projector can be • Charge the battery regularly. Don’t store found on www.philips.com/support for you the projector with a completely discharged to get the best features and support from the battery.
• Check that the sound is activated on the external device. • Only the original cables from the device manufacturer may function. No sound from external HDMI output • On the HDMI output device, set the audio setting device. to Stereo (PCM). Philips · PicoPix Max One...
Page 17
Problems Solutions No sound when you connect your • Check that the sound is activated on the computer computer via HDMI cable. and set to output to the projector. The projector does not react to remote • Check the batteries of the remote control. control commands.
Dimensions (W × D × H) ... 134 x 136 x 47 mm ........5.28 x 5.35 x 1.85 inches Weight ..........850g / 1.87 lbs Operating temperature......5 °C - 35 °C Storage temperature ........< 60 °C Philips · PicoPix Max One...
This device complies with Industry Canada CAN The Declaration of Compliance can be ICES-3 (B)/NMB-3(B) consulted on the site www.philips.com. RSS-Gen & RSS-247 statement: This device FCC statement complies with Industry Canada RSS standard(s). Operation is subject to the following two 15�19 Labeling requirements�...
Page 20
Screeneo Innovation SA shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/PHILIPS approved products. Philips · PicoPix Max One...
Page 21
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.