Husqvarna DC 655 Operator's Manual page 12

Hide thumbs Also See for DC 655:
Table of Contents

Advertisement

Available languages

Available languages

3. Turn the phase converter switch to (A) or (B).
4. Close the control panel.
To stop the product
1. If you stop the product temporarily, stop only the fan.
Note:
When the compressor is on during a short
stop, the product cleans the primary filters.
WARNING:
intake when the product cleaning cycle
goes. If the air intake is not closed, dust
can come in to the air. The dust particles
are dangerous to your health.
2. If you stop the product for more than 1 hour, stop the
fan, then do the steps that follow:
12
A
B
Always close off the air
a) Stop the compressor.
b) Set the ON/OFF switch to the OFF position.
c) Disconnect the power plug from the power
supply.
Dust storage systems
The collected dust is collected at the bottom of the
product in the dust storage system. You can use the
product with different dust storage systems. Refer to
Accessories on page 26 .
To empty the dust container
WARNING:
the dust container, a full dust container can
be heavy.
WARNING:
protection when you empty the dust
container. Refer to
equipment on page 7 .
Be careful when you empty
Use approved respiratory
Personal protective
2061 - 001 - 13.02.2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc 975

Table of Contents