Subsystem Syntax
[:IMMediate]
Comments
Example
68 Relay Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The
subsystem commands controls the triggering operation of the
TRIGger
multiplexer modules in a switchbox.
TRIGger
[:IMMediate]
:SOURce BUS|EXTernal|HOLD|IMMediate
:SOURce?
TRIGger[:IMMediate]
causes a trigger to occur when the defined trigger source is
TRIGger:SOURce HOLD
•
Executing the
TRIGger[:IMMediate]
defined with
[ROUTe:]SCAN <
command must be executed before
switchbox.
•
or
Source Remains: If selected, the
HOLD
BUS
TRIGger:SOURce BUS
switchbox with the
TRIGger[:IMMediate]
•
Related Commands:
Advancing Scan using the
TRIG:SOUR HOLD
SCAN (@100:115)
INIT
loop statement
TRIG
increment loop
or
TRIGger:SOURce BUS
Command: A channel list must be
channel_list
>
and an
TRIGger[:IMMediate]
commands remain in effect after triggering the
command.
,
INITiate
[ROUTe:]SCAN
Command
TRIGger
Sets trigger source to hold.
Sets channel list.
Starts scanning cycle.
Start count loop.
Advances channel list to next channel.
Increment count loop.
TRIGger
.
INITiate[:IMMediate]
can trigger the
TRIGger:SOURce HOLD
or