Table of Contents
Advertisement
2.2
Parent unit battery installation and power
supply
A rechargeable battery pack is supplied and should be fitted, so that
the parent unit can be carried to another location without losing the
link with the baby unit(s). Charge the parent unit before using it for
the first time or when the parent unit indicates that battery is low.
We recommend that the unit be charged for 15 hours prior to first
use.
1. Slide off the battery compartment cover.
2. Insert the plug of the rechargeable battery pack into the jack
inside the battery compartment.
3. Fit the battery pack into the compartment, with the label THIS
SIDE UP facing up.
4. Slide the battery compartment cover back until it clicks into
place.
5. Insert the DC plug of the power adapter with the smaller DC plug
into the DC jack on the side of the parent unit.
6. Connect the other end of the power adapter to a suitable mains
power.
7. The charging indicator comes on.
NOTE
Only use the provided power adapter and battery pack.
We recommend that you install and fully charge the battery in the
parent unit, so that it continues to work if you disconnect it from the
mains power to carry it to another location.
Getting Started
DC PLUG
THIS SIDE UP
DC JACK
11
Advertisement
Table of Contents
