Pioneer CDJ-900 Service Manual page 53

5
[7] Firmware update
The device and updater file name for update is the following.
Device
MAIN Main CPU
GUI CPU
GUI
PANEL PANEL CPU
SODC
DRIVE
A version is not contained in a file name.
Since the character sequence containing a version etc. is added to the head of each file, it can check by the editor,
viewer, etc.
When USB memory is used
Please use USB memory formatted by FAT/FAT32. It does not correspond to HFS+.
1 A file to update is copied to USB memory.
(One files will be copied if it is one pieces. Two files will be copied if it is two pieces. ......)
2 Please turn on a power supply, pushing both the buttons of MEDIA SELECT/USB and RELOOP.
(Please continue pushing until "Pioneer LOGO" screen disappears.)
It is displayed the message of "Connect a USB storage device to the USB port." , USB memory is inserted in USB port of
the front or the back. (If USB memory is put and it goes into the mode, a message will not be displayed but update will
start immediately.)
3 Update is automatically performed in the order of "GUI -> DRIVE -> MAIN -> PANEL".
The message of "NOW UPDATING" is displayed as follows during update.
And, the status of each microcomputer and each CPU is displayed with AUTO BEAT LOOP-LED.
GUI : AUTO BEAT LOOP[1]
(* Approx. 1 minute)
DRIVE : AUTO BEAT LOOP[2]
(* Approx. 1 minute)
MAIN : AUTO BEAT LOOP[4]
(* Approx. 2 minutes)
PANEL : AUTO BEAT LOOP[8]
(* Approx. 1 minute)
* Firmware update time.
AUTO BEAT LOOP
1
2
4
8
4 AUTO BEAT LOOP-LED of the device is turned off when there is no file, and the update is not done.
5 Since the message of "Firmware update is completed.Turn the power off before using." will be displayed if update is
completed, please return on a power supply.
5
6
File Name
C900MAIN.UPD Motorola formal text
C900GUI.UPD Motorola formal text
C900PANL.UPD Motorola formal text
C900DRIV.UPD Motorola formal text
File exists = Lighting / Update is progressing = Blinking / Update end = Turning off
File exists = Lighting / Update is progressing = Blinking / Update end = Turning off
File exists = Lighting / Update is progressing = Blinking / Update end = Turning off
File exists = Lighting / Update is progressing = Blinking / Update end = Turning off
BROWSE_FL
DATA_FL
CDJ-900
6
7
Remarks
7
8
A
B
C
D
E
F
53
8