Advertisement
1.
Unscrew the screws on PCB 4-2, and then remove PCB 4-2;
2.
Unscrew the screws on PCB support plate 4-3, and then remove PCB support plate;
3.
Unscrew the screws on PCB 4-4, and then remove PCB 4-4;
4.
Remove shielding finger 4-5 from front panel 4-1;
5.
Remove film 4-6 from front panel 4-1.
3.1.3 Guidance of treatments to module 5:
1.
Unscrew the screws on PCB 5-2, and then remove PCB 5-2;
2.
Remove shielding finger 5-3 from front panel 5-1;
3.
Remove film 5-4 from front panel 5-1.
3.1.4 Guidance of treatments to blank panel 6:
1.
Remove shielding finger 6-2 from blank panel 6-1;
2.
Remove film 6-3 from blank panel 6-1.
3.1.5 Guidance of treatments to fan module 9
EL-MF877-00
Template Revision B
Figure 4 Treatments to module 5
Figure 5 Treatments to blank panel 6
Page 4
Advertisement
