Advertisement
1.
Unscrew the screws on mounting angle 2, and then remove mounting angle 2;
2.
Unscrew the screws on cabling rack 3, and then remove cabling rack 3 from mounting;
3.
Unscrew the screws on front panel 4, and then remove front panel 4;
4.
Unscrew the screws on front panel 5, and then remove front panel 5;
5.
Unscrew the screws on blank panel 6, and then remove blank panel 6;
6.
Unscrew the screws on power supply module 7, and then remove power supply module 7;
7.
Unscrew the screws on blank panel 8, and then remove blank panel 8;
8.
Unscrew the screws on fan module 9, and then remove fan module 9;
9.
Remove film 10;
10. Unscrew the screws on rear cover plate 11, and then remove rear cover plate 11;
11. Remove all of the inner cables;
12. Unscrew the screws on PCB 12, and then remove PCB 12;
13. Remove plug 13;
14. Remove all of the labels;
15. Remove all of shielding fingers.
3.1.2 Guidance of treatments to module 4:
EL-MF877-00
Template Revision B
Figure 2 Rear of HP 7506
Figure 3 Treatments to module 4
Page 3
Advertisement
