Advertisement
EXTERNAL RECORDING
(UN)FINALIZING, ERASING
Automatic track increment
In recording mode, tracks will be incremented automatically so
that the track numbers are in the same position as the original.
• To switch the automatic track increment function on, press
as often as necessary TRACK INCR. on the remote control
during stop when CDR is selected.
Auto Tr ON is displayed and the function is on. Track
y
increments are now automatically detected from digital
source material. In analog source material, a silence of
2.7 seconds or more is detected as a track increment.
Finalizing CDR(W) discs
• To switch the automatic track increment function off, press
as often as necessary TRACK INCR. on the remote control
Finalizing a CDR(W) disc is a simple procedure, necessary to:
during stop when CDR is selected.
– play a recorded CDR on a standard CD player,
Auto Tr OFF is displayed and the function is off.
y
– play a recorded CDRW on a CDRW compatible CD player
Track numbers can now be incremented manually by
pressing TRACK INCR. on the remote control during
– avoid further unwanted recordings on a disc, or
recording. The minimum track length is 4 seconds.
– avoid erasure of tracks on a CDRW.
Notes: – Track numbers cannot be changed after recording.
Notes: – Finalizing will take about 2–4 minutes.
– The automatic track increment only works with
consumer sources with a digital output signal
according to the IEC 958 (consumer part) audio
standard. DAT, DVD and DCC do not deliver this
signal.
Auto finalizing
When using either CD™CD or COMPILE CD, your recordings
will be finalized automatically (see "High speed recording and
automatic finalizing").
Manual finalizing when recording is in progress
1 Press FINALIZE on the unit during recording.
y
2 Press YES to confirm.
y
Manual finalizing when recording is stopped
1 Insert the CDR(W) you want to finalize in the CD recorder tray.
2 Press CDR to select the CD recorder.
3 Press FINALIZE on the unit.
y
4 Press YES to start finalizing.
y
22
and CD recorder,
– After finalization of the CDR(W),
(
) changes to
CDR
W
on the display.
CD
– During finalization no other operating commands
can be executed.
Auto Final? is displayed.
is shown. The finalization will start after recording
FINALIZE
and the actual finalizing time left will start to count down.
Finalize? is displayed.
is shown, Final is displayed and the actual
FINALIZE
finalizing time left starts to count down.
5 Press YES to confirm your selection.
Unfinalizing CDRW discs
y
If you want to record (or erase) on (from) a finalized CDRW,
you have to unfinalize it first.
Notes: – Unfinalizing will take approximately 2 minutes.
6 Press YES to start erasing.
– After unfinalizing of the CDRW,
changes to
CD
CDRW
y
on the display.
– When unfinalizing a CDRW with CD text on it
available, this text will be transferred to the
CD recorder memory. In case the memory is full, you
Erasing one or more tracks
have to erase text (see " Erasing from the memory ")
1 Insert the CDRW from which you want to erase tracks in
or to finalize another disc first in order to obtain
the CD recorder tray.
memory space.
2 Press CDR to select the CD recorder.
1 Insert the CDRW you want to unfinalize in the CD recorder
tray.
3 Press ERASE to enter the erasing menu.
2 Press CDR to select the CD recorder.
4 Rotate í JOG CONTROL ë to select the track number(s)
you wish to erase.
3 Press FINALIZE on the unit.
y
Unfinalize? is displayed.
y
• To select more tracks to be erased, repeat step 4.
4 Press YES to start unfinalizing.
Note: When erasing more tracks, the tracks to be erased
y
Unfinal is displayed and the operation time remaining
starts to count down.
Erasing from a CDRW disc
y
5 Press YES to confirm your selection.
y
6 Press YES to start erasing.
y
It is possible to erase one or more tracks (starting from the
end of the last track) or the entire CDRW.
Erasing an entire CDRW
1 Insert the CDRW you want to erase in the CD recorder tray.
2 Press CDR to select the CD recorder.
3 Press ERASE to enter the erasing menu.
4 Rotate í JOG CONTROL ë to select:
Erase Disc?: for erasing the entire disc
y
(UN)FINALIZING, ERASING
Erase?, the total playing time and the total number of
tracks to be erased are displayed. All track numbers will
blink in the music calendar.
Erase is displayed and the operation time remaining
starts to count down. The track number of the actual
erased track will go off in the music calendar.
Erase and the track number (e.g. 10+)? are displayed.
must be selected in sequence, starting from the last
recorded track. Example: The CDRW has 5 tracks
recorded on it. Now, you can erase tracks 5 and 4. You
can also erase tracks 5, 4 and 3, but you cannot erase
tracks 5 and 3!
All track numbers selected for erasing will blink in the
music calendar. The remaining track numbers light up.
Erase? is displayed.
Erase is displayed and the operation time remaining
starts to count down. The track number of the currently
erased track will go off in the music calendar.
23
Advertisement
