Advertisement
EXTERNAL RECORDING
6 Start playback on the selected source.
DIGITA L /
ANALO G
y
AUX
STANDBY
TUNE R
ON
SOR
CD 1
iR SEN
CD 2
Note: If you start playback on the selected source within a
IME R
CK/T
CD 3
T CLO
CD TEX
MINI HIFI SYSTEM
CD RECORD ABLE
FW-
R8
DISPLAY
7 If a digital source is selected:
OPEN /CLO
SE
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
If an analog source is selected:
At the end of the recording process, the CD recorder stops
after a silence of 20 seconds on the source material.
MIC
LEVEL
• To stop recording manually, press Ç STOP on the unit.
y
MIC
DO NOT FORGET TO FINALIZE!
Analog or digital recording?
Finalizing a CDR(W) disc is a simple procedure, necessary to:
When making recordings from an external source, we
recommend to do analog recording only if digital recording is
not possible. Digital recording will usually result in better
sound quality.
Recording with automatic start
Recording of an entire disc or a track with automatic
start
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Repeatedly press DIGITAL / ANALOG AUX to select the
input for the external source from which you want to record.
AUX Digital is displayed if the digital input is
y
selected.
AUX Analog is displayed if the analog input is selected.
y
3 Press REC TYPE on the unit to enter the recording menu.
4 Rotate í JOG CONTROL ë to select either:
AUX CD?: for recording with synchronized start of an
y
entire disc
AUX Track?: for recording with synchronized start of
y
a track
5 Press YES to confirm your selection.
Start Source, AUX and the remaining recording
y
time of the CDR(W) are displayed.
20
The CD recorder starts to record simultaneously and
is shown. The remaining
RECORDING IN PROGRESS
recording time on the CDR(W) is displayed.
track, recording starts at the beginning of the next track
or after 2.7 seconds of silence in analog recordings.
after 20 seconds of silence.
goes off.
RECORDING IN PROGRESS
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
4 Repeatedly press DIGITAL / ANALOG AUX to select the
Manual recording
input for the external source with which you wish to mix
Manual recording from an external source
the microphone.
1 Make sure the CDR(W) is absolutely free of scratches and
y
dust particles.
y
2 Repeatedly press DIGITAL / ANALOG AUX to select the
input for the external source from which you want to record.
5 Press REC TYPE on the unit to enter the recording menu.
y
AUX Digital is displayed if the digital input is
selected.
6 Rotate í JOG CONTROL ë to select the type of recording:
y
AUX Analog is displayed if the analog input is selected.
y
3 Press REC TYPE on the unit to enter the recording menu.
y
4 Rotate í JOG CONTROL ë to select the type of recording.
7 Press YES to confirm your selection.
AUX Manual?: for manual start of recording
y
y
y
5 Press YES to confirm your selection.
Wait is displayed.
y
y
Record?, AUX and the remaining recording time of
8 Set the optimal recording level on the CD recorder (see
the CDR(W) are displayed.
"REC LEVEL key").
• In addition, you can also set the optimal recording level
6 Start playback on the external source in order to set the
optimal recording level on the CD recorder (see
"REC LEVEL key").
9 If AUX Mix Mic is selected:
Press YES on the unit and simultaneously start playback on
7 Stop playback on the external source.
the external source.
y
8 Go to the beginning of the desired track.
9 Press YES on the unit and simultaneously start playback on
the external source.
If Mic Only is selected:
y
The CD recorder starts to record and
RECORDING IN
Press YES on the unit to start recording.
is shown. The remaining recording time of the
PROGRESS
y
CDR(W) is displayed.
Note: If Check Input is flashing, check the digital
connection.
10 Press Ç STOP on the unit to stop recording.
y
10 Press Ç STOP on the unit to stop recording.
Update is displayed and
y
goes off.
RECORDING IN PROGRESS
DO NOT FORGET TO FINALIZE!
Manual microphone recording
Finalizing a CDR(W) disc is a simple procedure, necessary to:
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect
the microphone.
3 Connect a microphone to MIC.
EXTERNAL RECORDING
AUX Digital is displayed if the digital input is
selected.
AUX Analog is displayed if the analog input is selected.
AUX Mix Mic: the microphone is mixed with the
external source.
Mic Only: only the microphone is recorded.
Wait is displayed.
Record?, AUX and the remaining recording time of
the CDR(W) are displayed.
of the microphone by turning MIC LEVEL.
The CD recorder starts to record and
RECORDING IN
is shown. The remaining recording time of the
PROGRESS
CDR(W) is displayed.
The CD recorder starts to record and
RECORDING IN
is shown. The remaining recording time of the
PROGRESS
CDR(W) is displayed.
Update is displayed and
goes off.
RECORDING IN PROGRESS
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
21
Advertisement
