Honeywell T7270B2009 Installation And Operating Instructions Manual page 7

Wireless wall module
Table of Contents

Advertisement

Batteries
The batteries (two standard alkaline AA or LR6 or AM3
batteries) have a min. lifetime of 2 years.
Inserting Batteries
1.
Open the housing (see Fig. 5) by pressing the snap-on
lock on the bottom of the housing while removing the
cover.
2.
Remove any discharged batteries, if necessary.
NOTE: Batteries should not be disposed of in the household
garbage. You may be required by local law to
dispose of discharged batteries in a certain manner.
Always replace both batteries. Use only 1.5 V
mignon batteries of the type AA or LR6 or AM3.
Ensure that the polarity is correct (see Fig. 6 on
page 8).
3.
Insert the supplied (or replacement) batteries into the
battery compartment.
Low Batteries
If the batteries are nearing the end of their useful life, the
word "BATT" will appear in the LCD. This means that the
batteries must be replaced (see section "Inserting Batteries"
above).
7
T7270B2009 WALL MODULE
EN1B-0398GE51 R1207A

Advertisement

Table of Contents
loading

Table of Contents