Honeywell T7270B2009 Installation And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Wireless modules
  5. T7270B2009
  6. Installation and operating instructions manual
Honeywell T7270B2009 Installation And Operating Instructions Manual

Honeywell T7270B2009 Installation And Operating Instructions Manual

Wireless wall module
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
HONEYWELL EXCEL 5000 OPEN SYSTEM
Fig. 1. T7270B2009
APPLICATION
The T7270B2009 Wireless Wall Module is designed for use in
wireless systems, and is suitable for use in conjunction with
the W7070A2000 ZAPP Wireless Receiver.
FEATURES
•
Easy mounting, no wiring;
•
All functions combined in a single, easy-to-use wall
module;
•
Up to eight separate T7270B2009 wall modules can
simultaneously communicate with the W7070A2000 over
distances of approx. 30 meters and through two walls;
•
Permits not only HVAC, but also light and sunblind
control;
•
Fits seamlessly into XL10 / XL12 individual room control
systems.
® U.S. Registered Trademark
Copyright © 2007 Honeywell Inc. • All rights reserved
WIRELESS WALL MODULE
INSTALLATION AND OPERATING INSTRUCTIONS
STANDARDS AND NORMS
The ZAPP System complies with CE and EN 300 220-1 and
EN 301 489-1.
IMPORTANT!
It is recommended that devices be kept at room
temperature for at least 24 hours before applying
power to allow any condensation resulting from low
shipping/storage temperatures to evaporate.
Use in Combination with Legacy Devices
The T7270B2009 ZAPP Wireless Wall Module is suitable for
use only with the W7070A2000 ZAPP Wireless Receiver. It
cannot communicate with (but is likewise unaffected by)
legacy devices (e.g. the W7070A1000).
NOTE: Do not attempt to teach-in both an RT7070A2008
and a T7270B2009 to the same room.
TECHNICAL DATA
Batteries
1.5 V, type LR06, AA
Frequency
868.3 MHz (transmitter)
OVERVIEW
Functions
In the operating mode, the T7270B2009 features the following
six basic functions:
LIGHT (this is the default function),
SUNBLINDS,
OCCUPANCY,
FAN,
SETPOINT OFFSET and
TEMPERATURE DISPLAY/TRANSMIT function.
Controls
The T7270B2009 features three control buttons and a large
setpoint wheel used (in the operating mode) to select
individual functions and to adjust their respective settings:
•
the "function" button ("F"),
•
the UP (" ") and DOWN (" ") buttons, and
•
the setpoint wheel (for adjusting e.g. the value of the
temperature setpoint offset, etc.).
T7270B2009
EN1B-0398GE51 R1207A

Advertisement

Table of Contents
loading

Related Manuals for Honeywell T7270B2009

Summary of Contents for Honeywell T7270B2009

  • Page 1 Functions APPLICATION In the operating mode, the T7270B2009 features the following The T7270B2009 Wireless Wall Module is designed for use in six basic functions: wireless systems, and is suitable for use in conjunction with LIGHT (this is the default function), the W7070A2000 ZAPP Wireless Receiver.

  • Page 2: Light Function

    Controlling a Single Light Group (P6:1) the presence in the LCD of the function indication bar (see If the T7270B2009 has been configured to control only a Fig. 2), and a corresponding symbol; e.g. the fan symbol. single group of lights (see section "P6: Light Groups" on page...
  • Page 3 Thereafter, the P5 ("sunblind runtime") as well as by setting parameter P9 to T7270B2009 will automatically revert to the default display, 1 ("no sunblind") or to 2 ("one sunblind"). i.e. it will no longer be apparent that the OCCUPANCY func- tion had been invoked.

  • Page 4: Fan Function

    To check the version of the software currently loaded in the T7270B2009, the user must press the "F" button and the NOTE: The FAN function can be configured so as to be DOWN button simultaneously for approx.

  • Page 5: Configuration Mode

    P4: Temperature Setpoint Offset Limits With this parameter, the user can configure the range over By configuring the T7270B2009, the user can alter its func- which the temperature setpoint offset can be adjusted. tions / displays to better reflect the actual operating environ- •...

  • Page 6: Removing The Housing Cover

    "unoccupied" Do not mount the T7270B2009 on an outside wall, on a wall state: containing water pipes, or near air ducts. Avoid locations that •...
  • Page 7 T7270B2009 WALL MODULE Batteries The batteries (two standard alkaline AA or LR6 or AM3 batteries) have a min. lifetime of 2 years. Inserting Batteries Open the housing (see Fig. 5) by pressing the snap-on lock on the bottom of the housing while removing the cover.
  • Page 8 Honeywell Fig. 6. T7270B2009, dimensions in mm Honeywell Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative: Automation and Control Solutions Honeywell GmbH Böblinger Straße 17...

Table of Contents