If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead. ViewSonic WPG-350...
Page 3
EN 301 489-01 V1.6.1 (2005) EN 301 489-17 V1.2.1 (2002) EN 62311 (2008) Germany, UK, Netherlands, Belgium, Sweden, Denmark, Finland, France, Italy, Spain, Austria, Ireland, Portugal, Greece, Luxembourg, Estonia, Latvia, Lithuania, Czech Republic, Slovakia, Slovenia, Hungary, Poland and Malta. ViewSonic WPG-350...
0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Proposed Maximum Actual Concentration Concentration 0.1% 0.1% 0.01% 0.1% 0.1% 0.1% < 0.1% < 0.1% < 0.01% < 0.1% < 0.1% < 0.1% WPG-350...
VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
4-3 Video playback...30 4-4 Quarter Split Screen (MAC Version) ...31 Chapter V Configure WPG ...32 5-1 Conference Control ...32 5-2 Connect to Web Configuration Menu ...34 5-3 Status & Info ...35 5-4 Network Settings ...35 ViewSonic Table of Contents WPG-350...
11. When the product is powered on, do not connect or disconnect any connection cable. 12. If not using the product for a long time, please unplug A/C adapter from wall socket, and remove the battery inside remote controller. ViewSonic WPG-350...
Chapter I Product Introduction Congratulations on your purchase of ViewSonic Wireless Presentation Gateway WPG-350. This section introduces you to the WPG-350 (referred to as the WPG in this user guide). 1-1 Package Contents (1) WPG-350 (2) AC adapter (3) Remote controller...
Windows XP 32 bit or above Operating (Recommend Windows XP 32 bit) System MAC OS X 10.4 and 10.5 (Both PowerPC / Intel Version) 100Mbps Wired Fast Ethernet / Network 11Mbps 802.11b wireless Ethernet (Recommend 54Mbps 802.11g wireless Ethernet) ViewSonic WPG-350...
WPS (Wi-Fi Protected Setup) Output Resolution: 1024x768 or 800x600 Upgrade software via the Internet. Network security. 10. Presentation remote 11. Video capture, to capture screen image for projection* *This function will be available in Q4, 2009 via upgrade through Internet. ViewSonic WPG-350...
OFF. ‘POWER’ LED ‘LAN’ LED ‘WIRELESS’ LED ‘PC IN’ LED Description Connect to A/C adapter / ViewSonic projector’s D/C power outlet 10/100Mbps fast Ethernet port Connect to IR receiver Stereo audio output VGA video output Receives wireless signal.
5 Page up Go to next page 6 Page down Confirm selected user for 7 Confirm presentation Press battery lid and push it 8 Battery Lid downward by your thumb to open battery compartment 9 IR LED Infrared signal transmitter WPG-350...
1-5 Initial Setup Connection Overview Step-by-step setup instructions ViewSonic Connect one end of the VGA cable to the external display, and the other to WPG VGA-out port locates at back. Connect the Ethernet cable to the LAN port WPG-350...
Page 15
Adjust the antennas so they are perpendicular to the ground. Connect the A/C power adapter to the electrical outlet on the wall. Connect A/C power adapter to the power jack labeled as ‘12V’ at the back of WPG. ViewSonic WPG-350...
Page 16
To fix the product placement, please use two wall mount holes located at the back of the product. If you can see this start screen display on projector, indicates WPG-350 is working and all connection cables are correctly connected. WPG-350...
When WPG is powered on, check the connected display, you can find the IP address and login code Instruction Page: The IP Address (Wireless / Wired Ethernet) of the device. You can connect to WPG by the IP address of the connection type you’re using (wired / wireless). ViewSonic WPG-350...
Use your computer’s Wireless Network Connection window to access an available wireless network. Select the device from the list. Click Connect. The default device name is WPG-350. Note: If using a wireless client other than Windows, the screen above may look differently.
IP address of the computer. If the operating system of your computer is…. Windows XP Windows Vista Macintosh ViewSonic - please go to section 2-3-1 - please go to section 2-3-2 - please go to section 2-5-4 WPG-350...
IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s more than one computer need to use this WPG on the same network, each computer should use an unique number) Subnet Mask: 255.255.255.0 Click ‘OK’ when finish. ViewSonic WPG-350...
IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s more than one computer need to use this WPG on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 Click ‘OK’ when finish. ViewSonic WPG-350...
IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s more than one computer need to use this WPG on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 ViewSonic WPG-350...
(Wireless / Wired IP address) WPG’s IP address is shown at the Instruction page. Click ‘For Windows’ button to download application software. A window is prompted, to execute, please check “run”, or “save” to save application software for future usage. WPG-350...
Page 24
Please be patient when your computer is downloading application software: After application software download is complete, click ‘Run’. Click ‘Next’ to continue. A new icon will appear. ViewSonic WPG-350...
Page 25
‘Server IP’ will be determined automatically, please input a user name (login window uses your computer’s name by default), and input login code as displayed on upper-right of WPG-350’s display. If login code is correct, application software will appear. ViewSonic WPG-350...
WPG’s Instruction page. When you’re ready, click ‘OK’ button to continue. Login code must match with the one display on WPG’s Instruction page, else following message would appear. Click “OK” to enter the login code again. ViewSonic WPG-350...
Starts video playback mode Switch display source (display the image from your computer’s display or from ‘VGA IN’ connector) Quarter split display control. Click number 1 to 4 to start / stop presentation of corresponding quarter split display area. WPG-350...
Output resolution: changes display resolution and you can check “Follow Desktop” to equivalent to output based on original user desktop resolution setting. The resolution being used currently will have a check mark in front of it. Exit Close menu list ViewSonic WPG-350...
Stop video play Volume down Rewind (for 10 seconds) Open video file To start video playback: 1. Click ‘Video’ button 2. Click (7) to open video file. 3. Video will start playing automatically. 4. Click (4) to stop playing video. ViewSonic WPG-350...
NOTE: When ‘Presentation Lock’ is checked, no one will be able to interrupt a progressing presentation. ViewSonic Number 1 to 4 correspond to different area of display screen: When you click a number, your content will be displayed in corresponding Quarter-Split display area WPG-350...
‘Server IP’ will be determined automatically, please input a user name (login window uses your computer’s name by default), and input login code as displayed on upper-right of WPG-350’s display. If login code is correct, application software will appear. WPG-350...
WPG’s Instruction page. When you’re ready, click ‘OK’ button to continue. Login code must match with the one display on WPG’s Instruction page, else following message would appear. Click “OK” to enter the login code again. ViewSonic WPG-350...
Starts video playback mode Access menu list Quarter split display control. Click number 1 to 4 to start / stop presentation of corresponding quarter split display area. Switch display source (display the image from your computer’s display or from ‘VGA IN’ connector) WPG-350...
Repeat: Repeat video playback (in video playback mode) Minimize: minimizes application software Display: Show the name / SSID of WPG. Display Change resolution: changes display resolution. The resolution being used currently will have a check mark in front of it. Exit Close menu list ViewSonic WPG-350...
Fast forward (for 10 seconds) Rewind (for 10 seconds) Open video file To start video playback: 1. Click ‘Video’ button 2. Click (7) to open video file. 3. Video will start playing automatically. 4. Click (4) to stop playing video. ViewSonic WPG-350...
NOTE: When ‘Presentation Lock’ is checked, no one will be able to interrupt a progressing presentation. ViewSonic Number 1 to 4 correspond to different area of display screen: When you click a number, your content will be displayed in corresponding Quarter-Split display area WPG-350...
All users currently logged in will be displayed here. To select a user’s display content in certain area of Quarter-Split Display, click number 1 to 4; to display in full-screen, click the presenting user. To stop a progressing presentation, click █ button of WPG-350...
Page 38
(same as ‘Conference control’ function described in last chapter). Press ‘Login’ button on remote control. You can use ‘Prev.’ and ‘Next’ button on the remote controller to move the bar, then click button to select the presenting user. ViewSonic WPG-350...
Click ‘Administrator Login’ link on the left. Please input ‘admin’ as username. For time login you don’t have to input password, just click ‘OK’ to continue. You can change password after login. If you set password before, please input password in ‘Password’ field. ViewSonic WPG-350...
5-3 Status & Info Displays system information, like system software version and IP address. Many useful information can be obtained here when you need help about system configuration and firmware upgrade. 5-4 Network Settings ViewSonic WPG-350...
Page 41
“Restart” on the web configuration menu. ViewSonic Description WPG will obtain an IP address from DHCP server automatically. Set WPG IP address manually. Fill the fields below to setup IP address. Please input the IP address of the DNS (Domain Name Service) server. WPG-350...
Page 43
2.4GHz (B+G+N) - 802.11b, 802.11g, and 802.11n clients. Input the Device Name of presentation gateway here. Default is ‘WPG-350”. Select the wireless channel number: 1 to 13. (1 to 11 in certain version of product) Shows all connected wireless clients (wired clients will not be displayed here).
Set the beacon interval of wireless radio. Default value is 100. Set the DTIM period of wireless radio. Default value is 3. Change data transfer rate. Default value is ‘Auto’ and it’s recommended to use default setting. Same as above, but only for 802.11n clients. WPG-350...
Enhances the data transfer rate of network. Default setting is “Enable”. Wi-Fi MultiMedia Quality of Service is a set of features for Wi-Fi networks that improve the user experience for audio, video, and voice applications by prioritizing data traffic. Default setting is “Disable”. WPG-350...
Page 46
Enable WEP encryption. Wireless clients must support WEP encryption and know the encryption key you set here. ViewSonic Description Check this box to enable 802.1x authentication. IP address of RADIUS authentication server here. Port number of radius server here. Password of radius server. WPG-350...
Page 47
(0-9, a-z, and A-Z) if you select ‘ASCII’ key format, and use characters 0-9, a-f, and A-F for HEX Enables 802.1x authentication. You don’t have to check this box if you don’t have 802.1x authentication server. IP address of RADIUS authentication server. WPG-350...
Page 48
WPA2 (AES) / WPA2 Mixed for better security. Select the type of pre-shared key: Passphrase or HEX characters. Input WPA Passphrase here. Passphrase: 8 or more alphanumerical characters, up to 63 characters Hex: 64 characters (0-9, a-f, and A-F) WPG-350...
Page 49
Select the type of WPA cipher suite. Select ‘WPA (TKIP) for maximum compatibility and WPA2 (AES) / WPA2 Mixed for better security. IP address of your Radius authentication server. Port number of your Radius authentication server. Default setting is 1812. Password of your Radius authentication. WPG-350...
WPS wireless clients will need to know this code. Displays the device name of this WPG. Displays current wireless authentication mode. Here uses asterisk mark ( * ) to show WPA passphrase key. Select WPS configuration mode: ‘Registrar’ and WPG-350...
Page 51
NOTE 3: You can also press ‘WPS’ button located on the front of wireless presentation gateway to enter WPS mode, too. Input the PIN code (up to 8 characters) of the WPS-enabled device here, then click ‘Start PIN’ button, then WPG will establish connection with it automatically. WPG-350...
NOTE: When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking “Restart” on the main menu. ViewSonic Description Select the displaying language. Select output resolution for projection. Check this box to prevent other users to interrupt current presentation. WPG-350...
NOTE: When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking “Restart” on the main menu. ViewSonic Description Input current password here. New Password: Enter new password. Confirmed Password: Confirmed the new entered password. WPG-350...
Click ‘Save…’ button to save wireless presentation gateway’s current setting as a file and store it on your computer. Click ‘Browse…’ button to select a previously-saved configuration file stored in your computer’s folder. Reset all settings of wireless presentation gateway back to factory default settings. WPG-350...
‘Auto’; WPG will download latest firmware and upgrade automatically. Note: it’s recommended to use wired Ethernet connection to perform firmware upgrade. When firmware is upgrading, you’ll see the following message: WPG will restart automatically after upgrade is complete, please be patient. ViewSonic WPG-350...
5-9 Restart Restart WPG when the device is not working properly or to apply changes made on web configuration menu. Note: Restart takes about 60 seconds. ViewSonic WPG-350...
Page 57
Click ‘Apply’ to restart the WPG. (PC) (MAC) Click ‘OK’ to restart the WPG, or click ‘Cancel’ to abort. ViewSonic WPG-350...
Output Resolution Environmental Requirements Operating System Approvals Software ViewSonic WPG-350 External power supply (12V DC, 1A) 133.4 x 92.4 x 31.08mm 200g VGA Connector : VGA OUT ------ D-sub 15 pin mini x 1(Black) x 1 PC IN ------------D-sub 15 pin mini x1(Blue) x 1 Audio Output Interface: 3.5mm jack x 1...
Page 60
Support Format (For MAC) Category AVI * Audio: Does not support AAC and MP3 ViewSonic Format Video MPEG4 H.261 H.263 Microsoft MPEG-4 v1/v2 PCM, ADPCM MPEG1 MPEG1 MPEG1 MPEG4 WMV7** WMVA1**, WMVA2** WMV8** Format Video MPEG4 PCM, ADPCM Audio* Audio* WPG-350...
4. If there’s strong / fluorescent light source near IR transmitter / receiver, remote controller may not be able to function properly. 5. If the distance between IR transmitter / receiver is longer than 7 meters, remote controller may not working properly. ViewSonic WPG-350...
Scenario: I hear noise when WPG is operating. Solution: If you smell something strange or even see smoke come out from WPG, unplug the A/C adapter (if possible), and return the WPG back to dealer of purchase immediately. ViewSonic WPG-350...
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com...
LIMITED WARRANTY Please go to the Customer Support table in this guide for the ViewSonic website in your region to get warranty information. ViewSonic WPG-350...