Table of Contents
Advertisement
Quick Links
ViewSync 3
Wireless Presentation Gateway
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. "Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual"
Model No. VS15180
Advertisement
Table of Contents
Related Manuals for ViewSonic ViewSync 3
Summary of Contents for ViewSonic ViewSync 3
- Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
- Page 2 At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well. Once again, thank you for choosing ViewSonic !
-
Page 3: Fcc Notice
Compliance Information Please read before proceeding • Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void your warranty. • Do not store your device in temperatures higher than 50°C (122°F). • The operating temperature for this device is from 0°C (32°F) to 35°C (95°F). FCC Notice The following statement applies to all products that have received FCC approval. -
Page 4: Fcc Sar Information
FCC SAR Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. -
Page 5: Declaration Of Rohs2 Compliance
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance... -
Page 6: Copyright Information
Serial Number: Purchase Date: Product disposal at end of product life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/... -
Page 7: Table Of Contents
1-1 Package Contents ...................1 1-2 Hardware Recommendation................1 1-3 Highlights......................2 1-4 Remote Controller ...................3 1-5 Hardware Setup/Installation ................5 Chapter 2: ViewSync 3 administration setting 2-1 Connect to Web Configuration Menu ..............6 2-2 Status & Info ....................7 2-3 Network Setting ....................8 2-4 Wireless Settings...................10 2-5 WiFi connection setting .................13... - Page 8 Windows 7 ......................33 Windows 8 ......................36 Chapter 4: Using ViewSync 3 on Screen Mirroring Mode 4-1 Switch ViewSync 3 to Screen Mirroring Mode (Android).......40 Chapter 5: Using ViewSync 3 on DLNA Media Streaming Mode 5-1 DLNA Media Streaming.................41 Appendix A: Support resolution ................43 Appendex B: ViewSync 3 Support Media Format ..........43...
-
Page 9: Chapter 1: Product Introduction
Chapter 1: Product Introduction Congratulations on your purchase of ViewSonic Wireless Presentation Gateway ViewSync 3. This section introduces you to the ViewSync 3 (referred to as the ViewSync 3 in this user guide). 1-1 Package Contents ViewSync 3 AC adapter with UK/EU/US plug... -
Page 10: Highlights
- Android 4.2 OS or later - Samsung / Sony (HDMI only) 3. DLNA Media Streaming (HDMI/VGA) ViewSync 3 is designed to able to stream video/music/photo contents from PC (Windows 7 based), smart phone, and Tablet-PC to your TV through this device. Smart phone •... -
Page 11: Remote Controller
1-4 Remote Controller Button Description Power On/off the ViewSync 3 Enable Moderator mode WiFi projection use for PowerPoint use, page up/down, freeze, play by full screen WiFi projection use as Mouse right button Cursor control on Menu and WiFi projection as Mouse simulation. - Page 12 Remote controller effective distance is 7 meters. This distance will be shortened in some environments, or when the battery is low. If there’s strong light source near ViewSync 3 and / or remote controller, remote controller may not be able to function properly.
-
Page 13: Hardware Setup/Installation
1. Connect your device Note: HDMI and VGA can’t be connected at the same time. 2. Connect power and push power button to turn on ViewSync 3. Wait a few seconds for the screen below to load, and then select your preferred... -
Page 14: Chapter 2: Viewsync 3 Administration Setting
Chapter 2: ViewSync 3 administration setting 2-1 Connect to Web Configuration Menu Please key IP address in browser, default is 192.168.59.254, or press Help button to get IP information Default pass word is “admin”. Item Description Application Download application download... -
Page 15: Status & Info
2-2 Status & Info Displays system information, like system software version and IP address. Many useful information can be obtained here when you need help about system configuration and firmware upgrade. -
Page 16: Network Setting
2-3 Network Setting Displays and configures the network settings. - Page 17 ViewSync 3 will obtain an IP address from DHCP server IP address automatically. Automatically Use the following Set ViewSync 3 IP address manually. Fill the fields below to IP Address setup IP address. Please input the IP address of the DNS (Domain Name DNS Server Service) server.
-
Page 18: Wireless Settings
Device Name Input the Device Name of presentation gateway here. Default is (SSID) ‘ViewSync 3”. Click ‘Apply’ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking “Restart” on... - Page 19 “Security” Setting Encryption: Disabled Disables wireless encryption. Encryption: WPA +WPA2 Enable WPA + WPA2 encryption. Wireless clients must support WPA encryption and know the encryption passphrase you set here. NOTE: When the configuration settings are changed, you must restart the network connection.
- Page 20 Band Setting Item Description Band Select the wireless band. Available options are: 2.4GHz (B+G+N) - 802.11b, 802.11g, and 802.11n clients. 5GHz - 802.11b, 802.11n clients.
-
Page 21: Wifi Connection Setting
2-5 WiFi connection setting 1. If LAN cable was linked on ViewSync 3, LAN client mode is first priority, WiFi AP mode will be disable. 2. If setup WiFi connection successful, ViewSync 3 will become WiFi Client mode. your PC or phone need to link the same WiFi AP router for WiFi projection or... -
Page 22: Projection Setting
2-6 Projection Setting Displays and configures the projection setting. Item Description Instruction Page Language Select the displaying language. Selection HDMI Output Select HDMI output resolution for projection. Resolution VGA Output Select VGA output resolution for projection. Resolution Login Code Enable /disable Login code request Over write User can interrup and replace the current presenter NOTE: When the configuration settings are changed, you must restart the network... -
Page 23: Password Setting
2-7 Password Setting Displays and configures the password setting. Item Description Current Password Input current password here. Default pass word is “admin”. New Password: Enter new password. New Password / Confirmed Password Confirmed Password: Confirmed the new entered password. Click ‘Apply’ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection. -
Page 24: Firmware Upgrade
2-8 Firmware Upgrade Select ‘Auto’, ViewSync 3 will download and upgrade latest firmware automatically once ViewSync 3 connects to Internet. If “Auto” upgrade fail, suggest using Manual Firmware upgrade, update process as following: Download the firmware by pressing “Manual” button or ViewSonic website. -
Page 25: Restart
2-9 Restart Restart ViewSync 3 when the device is not working properly or to apply changes made on web configuration menu. Click ‘OK’ to restart the ViewSync 3, or click ‘Cancel’ to abort. -
Page 26: Logout
2-10 Logout If you wish to logout from web configuration menu, click ‘Logout’. 2-11 OSD Menu Click “Menu” on remote control and will show below menu on the screen. -
Page 27: Network Setting
ViewSync 3 will obtain an IP address from DHCP server automatically. Automatically Use the following IP Set ViewSync 3 IP address manually. Fill the fields below to setup IP address. Address Please input the IP address of the DNS (Domain Name DNS Server Service) server. - Page 28 WiFi Connection Click WiFi connection button. Then there will show the Wireless AP list on the screen. Please choose the AP you want to connect. The function is to connect to Internet via another Wireless AP. Virtual AP Setup Item Description Set the Radio band to 2.4GHz or 5GHz.
- Page 29 AP Mode • Default setting, after factory reset will return to AP mode. • User WiFi direct link to ViewSync 3, no internet access) • Performance is better than Client mode. Client mode by LAN (priority higher then AP mode and WiFi Client mode) •...
- Page 30 Audio Setting You can adjust the advanced audio setting such as Night mode, HDMI Audio output format, SPDIF output format, Surround sound setting and Lip Sync setting in this page. Video Setting You can adjust Aspect Ratio, TV out video format, and other video setting in the video setup page.
- Page 31 System Setting You can set the OSD language, reset to Factory default, check the detail firmware version, and do the firmware upgrade in the system setup page. Note: Main firmware version is shown on the startup screen. Language selection is for OSD menu only, not for startup page.
-
Page 32: Chapter 3: Wifi Projection
2.1 WiFi Link to ViewSync 3 2.2 Key in IP address on IE, will show download page as following (press ? on Remote to check IP address, if direct link to ViewSync 3, default IP is 192.168.59.254.) 2.3 Download software base on OS... - Page 33 If ViewSync has set WPA security, it is needed to key password on step A. If ViewSync 3 set Login code, it is needed to key Login code before Play to ViewSync 3 on step B 2.5.1.2 Next time, ViewSync 3 will be listed on Saved column, it will...
- Page 34 If DreyTek wifi router set WPA security, it is need to key password on step A. If ViewSync 3 set Login code, it is needed to key Login code before Play to ViewSync 3 on step B 2.6.2 Next time, ViewSync 898 will be saved , it will auto select correct...
- Page 35 AutoProject software standby UI (1) Menu (2) Play/Pause (3) Stop (4) Enable Moderator (5) Annotator 3.1 Menu 3.1.1 Display Mode: Mirror Mode /Extend Mode 3.1.2 HDMI/VGA resolution 3.1.3 Aspect Ratio: Auto / 4:3 / 16:9 / 16:10 3.1.4 Web Page: Click will link to Web page setting...
- Page 36 Software will remember setting. 3.1.5.3 USB Keyboard/Mouse Back control: For Mirror mode only, if Keyboard and Mouse plug in ViewSync 3 USB port. It can back control computer who has projected to ViewSync 3. 3.1.5.4 Enable Remote Cursor (Disable Computer Mouse cursor) ViewSync 3 will generate a virtual cursor to replace original Mouse cursor.
-
Page 37: Moderator Mode
3-2 Moderator Mode Moderator control by remote. • Remote control design a Moderator button, press it will become Moderator Mode. • All user will be standby and listed on the screen • Moderator can select attendee to project screen by remote directly. - Page 38 Moderator control by Software. • Press , Enable Moderator mode (just can enable Moderator when ViewSync 3 is on Standby status) • Key in password, default password is “adminpwd” • UI on the screen will be changed to Moderator...
- Page 39 • Software UI will be changed as following, Moderator can select Attendee on User List, check screen status before projection.
-
Page 40: Faq
• If Laptop native resolution over 1920x1080, please select “Enable Auto Scale down” on software setting of Menu. 3. Question: when I install ViewSync 3 software, I meet the problem which show .Net Framework not ready Answer: please follow the below process to enable it. -
Page 41: Windows 7
Windows 7 How To Install Microsoft .NET Framework 3.5.1 on Windows 7 Microsoft .NET Framework version 3.5.1 is included with Windows 7. Follow the steps below to enable it. If you try to run .NET 3.5 installer downloaded from the Microsoft website on Window 7, you will receive the following error: You must use "Turn Windows features on or off"... - Page 42 2. Click Programs 3. Click Turn Windows features on or off 4. Click the checkbox next to Microsoft .NET Framework 3.5.1...
- Page 43 5. You will see the checkbox become filled 6. Click OK 7. Wait for Windows to complete the operation. If it asks you to connect to Windows Update to download required files, click Yes.
-
Page 44: Windows 8
Windows 8 How to enable .NET Framework 3.5 on Windows 8 in Offline Mode Problem Description Windows 8 does not include .NET 3.5 (include .NET 2.0 and 3.0) by default. But if the user is upgrading from Windows 7 to Windows 8, .NET Framework 3.5 is fully enabled. - Page 45 Step Click Turn Windows features on or off, and the user will see window as image below. The User can enable this feature by click on .NET Framework 3.5 (include .NET 2.0 and 3.0) select it and click OK. After this step, it will download the entire package from internet and install the .NET Framework 3.5 feature.
- Page 46 How To Do The following are the steps to enable .NET Framework 3.5 (include .NET 2.0 and 3.0) feature in offline mode : Step 1: Insert Windows 8 DVD or mount ISO image. The source of this feature can be found in folder E:\sources\sxs.
- Page 47 Step 3: Run the following command Dism.exe /online /enable-feature / featurename:NetFX3 /All /Source:E:\sources\sxs /LimitAccess, and hit Enter. After completing the installation of .NET Framework 3.5 you can see that the feature is enabled.
-
Page 48: Chapter 4: Using Viewsync 3 On Screen Mirroring Mode
• SH-09D • SH-10D Remarked: 1. Once connect to ViewSync 3 by Screen Mirroring(Miracast), ViewSync 3 wifi connection will be disconnected 2. ScreenMirroring will be disable when ViewSync change to 5G or link to 5G wifi router because ScreenMirroring is only handshaking on 2.4G, so ScreenMirroring... -
Page 49: Chapter 5: Using Viewsync 3 On Dlna Media Streaming Mode
Chapter 5: Using ViewSync 3 on DLNA Media Streaming Mode 5-1 DLNA Media Streaming In Media Streaming, you can stream photo/music/video from your PC, Smartphone or tablet. Or play video/Music/photo form USB. Please follow the instruction to do media streaming. if Wifi Projection is playing, please don't use Media Streaming. - Page 50 Please check user manual of each software. • Android: ViewMedia • iOS: ViewMedia Play media by USB • Plug in USB drive in to ViewSync 3 • Use remote select folder and delete content • You can play Video, Photo or music that you select.
-
Page 51: Appendix A: Support Resolution
Appendix A: Support resolution Interface Output resolution 800x600@60Hz, 1024x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1366x768@60Hz NTSC, PAL, 480p, 576p, 720p@50Hz, 720p@60Hz, HDMI 1080i@50Hz, 1080i@60hz, 1080p@50Hz, 1080p@60Hz Appendex B: ViewSync 3 Support Media Format Video Format Format File extension MPEG-1 mpg, mpeg MPEG-2 mpg, mpeg... -
Page 52: Customer Support
Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Mexico) la/soporte/servicio-tecnico Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: 55) 6547-6454 55)6547-6484 Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Peru) la/soporte/servicio-tecnico Macau www.hk.viewsonic.com T= 853 2870 0303 service@hk.viewsonic.com... - Page 53 ® What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
- Page 54 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
- Page 55 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
- Page 56 Tel: (52) 999-925-1916 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 14035 Pipeline Ave. Chino, CA 91710, USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com...