Advertisement
ADDITIONAL SAFETY INSTRUCTIONS FOR
TOASTERS
• Do not immerse the appliance, cord set or plug in liquids.
• Always leave suff cient space around the appliance for ventilation.
• Do not use the unit if you have wet hands or bare feet.
• "Switch off the appliance before changing accessories or approaching parts
which move in use".
• The bread may burn. therefore do not use the toaster near or below
combustible material, such as curtains.
ASSEMBLY
• This appliance is supplied fully assembled & only requires parts to be cleaned
before use. See "Cleaning" for details.
INSTRUCTIONS FOR USE
• Place the bread to be toasted in the Toasting slots (1). One or two slots may be
used at a time. Move the browning control (5) to the required setting.
• Connect the appliance to a suitable electrical supply. Push the pop-up lever (6)
gently down until it locks in position.
• The bread will be lowered as the lever moves down. The browning control sets
the time that the toaster will operate.
• After that time has elapsed, the popup lever will be released & the toast will auto
matically lift to the top of the slot.
Note: The toast will be hot, use caution when removing hot toast from the
appliance.
If the toast is too dark, move the browning control to a lower number before
continuing. If the toast is too light, move the browning control to a higher number
before continuing.
Note: Surfaces may be hot during use and during the cool down period.
Disconnect the appliance from the electrical supply.
Frozen Bread
• Frozen bread can be used to make toast using the "Frozen Bread" function.
• To toast frozen bread, place the bread into the bread slots and select the desired
Brewing Setting. Push the pop-up lever down until it clicks into place then press
the frozen button (2).
3
Re-Heat
• The toaster allows you to reheat toast without additional toasting. To reheat,
place toast into bread slots, Push the pop-up lever until it clicks into place and
press there-heat button (3).
Cancel
• The toasting operation can be halted at any time by pressing the cancel
button (4).
MAINTENANCE
• Your Black+ Decker tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance or cleaning of the tool, disconnect
the appliance from the power supply. Ventilation slots should be cleaned
occasionally with a clean, dry paint brush.
CLEANING
• Disconnect the appliance from the electrical supply.
• Pull the crumb tray (7) from its location & empty any crumbs into a suitable
container.
• The crumb tray may be washed in warm soapy water. Rinse with clean water and
dry thoroughly with a dry soft cloth.
• Re-fit the crumb tray in its slot, ensuring the walls on the tray are facing the top.
All other parts should be cleaned with a damp cloth & be dried thoroughly using
a dry soft cloth before re-use.
Note: Do not use abrasives or chemical cleaners on any part of this appliance.
4
Advertisement
