(3) Jumbo Packet
It is necessary to set the Jumbo Packet parameter of the network adapter matching to the
connected network equipment (switching hub etc.).
Please set Jumbo Packet parameter by the following procedures.
1.
Open Device Manager.
2.
Expand Network Adapters, and then double-click the name of the network adapter you
want to set. The properties of the network adapter will be displayed.
3.
Open Advanced tab and click Jumbo Packet to show Value.
4.
Change the value by the down-arrow button.
5.
Click OK in the Network adapter properties dialog box.
Important
Set all Jumbo Frame to the same value to all adapters that composes the team.
- 9 -
st
April 2016(1
Edition)
808-882328-319-A