Related Manuals for NEC N8104-157
Summary of Contents for NEC N8104-157
- Page 1 N8104-157 LAN Driver Installation Guide (Intel R207) - 1 - April 2016(1 Edition) 808-882328-319-A...
-
Page 2: Table Of Contents
Contents Preface ................................3 1.1. Target OS .................................3 1.2. Target ................................3 1.3. Registration Trademark ............................3 Installation of Windows Driver ........................4 2.1. The flow of LAN driver installation process ......................5 2.2. Confirmation of LAN driver version ........................6 2.3. LAN driver Installation ............................7 2.4. -
Page 3: Preface
Preface Thank you very much for purchasing our product. This installation guide explains how to set up the LAN drivers of [N8104-157] Dual Port 10GBASE-T Adapter. 1.1. Target OS Abbreviated designation Software Production Name Microsoft® Windows Server® 2012 Standard Windows Server 2012 Microsoft®... -
Page 4: Installation Of Windows Driver
-> Click to model name (product name). -> Click to “NEC N8104-157 LAN Driver Module (Version R207)” in “Other update”. Create a Temp folder directly under the system drive. (e.g., C:\Temp\) Unzip GVO-008431-G01_xxxxxxxxxxxxxxxxxx.zip, copy the LAN folder in the Temp folder. -
Page 5: The Flow Of Lan Driver Installation Process
2.1. The flow of LAN driver installation process The flow of LAN driver installation process The installation process is executed by the following flow. Start [2.2. Confirmation of LAN driver version] Confirm the Network adapter driver version. Install for the first time? Is installation of LAN driver necessary? [2.3. -
Page 6: Confirmation Of Lan Driver Version
2.2. Confirmation of LAN driver version Check the Driver version by the procedure below. 1. Sign in to the system into administrator account. 2. Open Device Manager, confirm “Intel(R) Ethernet Controller X550” exists under Network adapters. Double-click and display property. - If ”Intel(R) Ethernet Controller X550”... -
Page 7: Lan Driver Installation
2.3. LAN driver Installation 1. Run a command prompt as administrator. Enter the following command at the command prompt. cd C:\temp\LAN 2. Enter the following, and then press Enter key. Windows Server 2012 INSTALL_WS2012.bat Windows Server 2012 R2 INSTALL_WS2012R2.bat 3. -
Page 8: Setting Up Lan Drivers
2.4. Setting up LAN drivers ・Sign in the system by administrator account for execute the operation below. Important ・After changing parameters of the LAN driver, restart the system. 2.4.1. Setting up common (1) Setting link speed The transfer rate and duplex mode of the network adapter must be the same as Important those of the switching hub. - Page 9 (3) Jumbo Packet It is necessary to set the Jumbo Packet parameter of the network adapter matching to the connected network equipment (switching hub etc.). Please set Jumbo Packet parameter by the following procedures. Important Set all Jumbo Frame to the same value to all adapters that composes the team. Open Device Manager.
-
Page 10: Adapter Teaming Setting
Adapter teaming setting This section describes setting procedures about adapter teaming. Refer to the URL below and follow the instructions. - Windows Server 2012: http://www.58support.nec.co.jp/global/download/w2012/index.html -> [Technical Information] - [NIC Teaming (LBFO)] - Windows Server 2012 R2: http://www.58support.nec.co.jp/global/download/w2012r2/index.html -> [Technical Information] - [NIC Teaming (LBFO)]... -
Page 11: Notice
Notice This section describes notice of installing. Read the following notes or information before installing. 4.1. About the operation by remote desktop To operation that has been described to this document, Sign in to the system from a local console using an administrator account.