Table of Contents
Advertisement
Fire Alarm Control Panel LT-32 / LT-159
13.5 Configuration – description
1.
From the "Program menu", press the "Description" icon
points.
2.
To define a Zone, press on the icon
keyboard appears to enter the description. It is possible to insert up to 20 characters. Press the "enter" key to save and confirm the zone description. Press the
back arrow
to go back to the previous screen.
40
; the "Zone" icon
, then press at the right side of the zone number (e.g. Z01), below the icon
allows you to define the zones and the "Point" icon
allows you to define the
and type the name of the zone. A QWERTY
M-168.1-SERIE-LT-EN / 08.2022
Advertisement
Table of Contents
