NEC Express5800 Series User Manual page 82

(14) Supported resolutions / refresh rates
The LCD of the console drawer supports the resolutions and refresh rates below.
When the console drawer is connected to the server, an adequate screen information is automatically used to display.
However, on some server, the indication may flicker or blur. The screen may fail to display information depending on
input signals. In such a case, adjust the screen display according to page 73. The adjusted value can be saved.
<DVI-D digital port / VGA analog port>
Resolution
640×480
720×400
800×600
1024×768
1280×720
1280×1024
1440×900
1680×1050
1920×1080
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
82
Horizontal frequency
(KHz)
31.5
37.5
37.9
31.5
35.2
37.9
46.9
48.1
48.4
56.5
60.0
45.0
64.0
80.0
55.5
55.9
64.7
65.3
67.5
Note LCD display
Immediately after power-on of the system or starting/quitting of OS, the

screen display may become unusual (e.g., the display position is shifted
or the screen blinks). However, this is not a failure of the LCD.
If any other resolution than 1920×1080 is specified, the outline of

character may not be clear or thin strips are not even. This is because
the pseudo display is used and not a failure of the LCD.
Some dots do not turn on, and some dots keeps turning on may exist on

the screen. This is a characteristic of the liquid crystal display and not a
failure of LCD.
Vertical frequency
(Hz)
59.9 VGA 60
75.0
72.8
70.0
56.3 SVGA 56
60.3 SVGA 60
75.0
72.2
60.0 XGA 60
70.1
75.0
60.0
60.0 SXGA 60
75.0
59.9 WXGA+ 60RB
59.9 WXGA+ 60
59.9 WSXGA+ 60RB
60.0 WSXGA+ 60
60.0 1080P (FULL HD) is recommended.
Mode