AEG FSK94847P User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK94847P
  6. User manual

AEG FSK94847P User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSK94847P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK94847P

Summary of Contents for AEG FSK94847P

  • Page 1 FSK94847P User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............30 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...

  • Page 4: Safety Instructions

    Only a qualified person must install this appliance. www.youtube.com/electrolux www.youtube.com/aeg • Remove all the packaging. How to install your AEG/Electrolux • Do not install or use a damaged 60 cm Sliding Door Dishwasher appliance. • Follow the installation instructions supplied with the appliance.
  • Page 5 ENGLISH • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable.

  • Page 6: Product Description

    • Concerning the lamp(s) inside this guarantee. product and spare part lamps sold • The following spare parts will be separately: These lamps are intended available for 7 years after the model to withstand extreme physical...

  • Page 7: Control Panel

    ENGLISH Air vent Lower basket handle Rinse aid dispenser Upper basket Detergent dispenser Cutlery drawer ComfortLift basket Trigger handle 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy.

  • Page 8: Programme Selection

    4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use".
  • Page 9 ENGLISH ExtraSilent programme. The option increases the wash temperature and duration. ExtraSilent allows to reduce the noise GlassCare generated by the appliance. When the option is activated, the wash pump works GlassCare prevents delicate load, quietly at a lower speed. Due to the low glassware in particular, from damaging.

  • Page 10: Basic Settings

    Pro‐ Dishwasher Degree of Programme phases EXTRAS gramme load soil AUTO Crockery, • Prewash Not applicable Sense cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry Machine For cleaning the appliance •...
  • Page 11 ENGLISH Settings Values Description Water hardness 1 - 10 (default: 5) Adjust the level of the water softener accord‐ ing to the water hardness in your area. Rinse aid level 0 - 6 (default: 4) Adjust the level of the rinse aid according to the necessary dosage.
  • Page 12 • The display shows the first The appliance returns to the programme available setting and its current selection. value. The saved settings remain valid until you change them again. How to change a setting 6.2 The water softener Make sure the appliance is in setting mode.
  • Page 13 ENGLISH Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to prolong the programme duration by be regenerated regularly. This process is another 5 minutes when it occurs at any automatic and is the part of the normal point at the beginning or in the middle of...
  • Page 14 6.5 AirDry deactivation is saved. It is then selected automatically after you activate the AirDry improves the drying results. The appliance. appliance door opens automatically When the latest programme selection is during the drying phase and remains disabled, the default programme is ECO.

  • Page 15: Before First Use

    ENGLISH 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4.

  • Page 16: Daily Use

    7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
  • Page 17 ENGLISH 8.2 Using the detergent The basket is automatically locked on the upper level. 2. Carefully place items in the basket or remove them (refer to the basket loading leaflet). 3. Lower the basket by connecting the CAUTION! trigger handle with the basket frame Only use detergent as shown below.
  • Page 18 8.3 How to select and start a 8.5 How to start the AUTO programme using MY TIME Sense program selection bar 1. Press 1. Slide your finger across MY TIME • The light related to the button is selection bar to choose a suitable programme.

  • Page 19: Hints And Tips

    ENGLISH The appliance returns to the programme Opening the door while the selection. appliance operates may affect the energy Make sure that there is consumption and the detergent in the detergent programme duration. dispenser before you start a new programme. If the door is opened for more than 30 seconds 8.10 The Auto Off function...
  • Page 20 9.3 What to do if you want to • To prevent limescale buildup inside the appliance: stop using multi-tablets – Refill the salt container whenever necessary. Before you start using separately – Use the recommended dosage of detergent, salt and rinse aid, complete the detergent and rinse aid.

  • Page 21: Care And Cleaning

    ENGLISH • Put light items in the upper basket. 2. First remove items from the lower Make sure that the items do not move basket, then from the upper basket. freely. After the programme is • Put cutlery and small items in the completed, water can still cutlery drawer.
  • Page 22 Carefully follow the instructions on the packaging of the product. • For optimal cleaning results, start the programme Machine Care. 10.3 Removal of foreign objects Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g.
  • Page 23 ENGLISH 2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks. from the holes.
  • Page 24 10.8 Cleaning the ceiling 2. To detach the spray arm from the basket, press the spray arm upwards spray arm and simultaneously turn it clockwise. We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.

  • Page 25: Troubleshooting

    ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers.
  • Page 26 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clogged. • Make sure that the drain hose has no kinks or bends.
  • Page 27 ENGLISH Problem and alarm code Possible cause and solution The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of the pro‐ gramme duration. Small leak from the appli‐ •...
  • Page 28 11.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.

  • Page 29: Technical Information

    ENGLISH Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. bleware, on the tub and on the •...

  • Page 30: Environmental Concerns

    12.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database and product number that you can find on the rating plate of the appliance. Refer to The QR code on the energy label the chapter "Product description".
  • Page 32 www.aeg.com/shop...

Table of Contents