AEG FSK93847P User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK93847P
  6. User manual

AEG FSK93847P User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSK93847P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK93847P

Summary of Contents for AEG FSK93847P

  • Page 1 FSK93847P User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............29 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.

  • Page 6: Product Description

    They are not and firmware including reset software.

  • Page 7: Control Panel

    ENGLISH Upper basket Cutlery drawer 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy.

  • Page 8: Programme Selection

    Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning".
  • Page 9 ENGLISH ExtraPower GlassCare ExtraPower improves the GlassCare prevents delicate load, dishwashing results of the selected glassware in particular, from damaging. programme. The option increases the The option prevents rapid changes in the wash temperature and duration. dishwashing temperature of the selected programme and reduces it to 45 °C.

  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 11.0 0.620 11.8 0.970 1h 30min 11.9 1.110 2h 40min 11.9 1.210 11.0 0.848 AUTO Sense 12.1 1.220 Machine Care 10.6 0.710 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH Settings Values Description Latest prog. selec‐ Enable or disable the automatic selection of tion OFF (default) the most recently used programme and op‐ tions. Display on floor ON (default) Activate or deactivate TimeBeam. Brightness From level 0 to level Adjust the brightness of the display.
  • Page 12 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 13 ENGLISH 6.3 Rinse aid level Water softener lev‐ Amount of water The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid. When the rinse aid dispenser is empty, In case of the high water softener setting, the display shows the indicator...

  • Page 14: Before First Use

    The duration of the drying phase and the TimeBeam displays the following door opening time vary depending on the information on the floor below the selected programme and options. appliance door: • The programme duration when the When AirDry opens the door, the display programme begins.
  • Page 15 ENGLISH 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the 6.

  • Page 16: Daily Use

    4. Close the lid. Make sure that the lid Fill the rinse aid dispenser locks into position. when the indicator (A) is clear. 8. DAILY USE 1. Open the water tap. 2. Press and hold until the appliance is activated.
  • Page 17 ENGLISH 8.2 Using the detergent 8.3 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on. •...
  • Page 18 8.5 How to start the AUTO Opening the door while the Sense program appliance operates may affect the energy 1. Press consumption and the • The light related to the button is programme duration. • The display shows the longest If the door is opened for possible program duration.

  • Page 19: Hints And Tips

    ENGLISH The Auto Off function switches the All buttons are inactive except for the appliance off automatically. on/off button. 9. HINTS AND TIPS 9.1 General 9.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use •...

  • Page 20: Care And Cleaning

    3. Start the Quick programme. Do not pewter and copper as they could add detergent and do not put dishes crack, warp, get discoloured or pitted. in the baskets. • Do not wash in the appliance items 4. When the programme is completed,...
  • Page 21 ENGLISH the indicator . Start the Machine Care CAUTION! programme to clean the appliance If unable to remove the interior. foreign objects, contact an Authorised Service Centre. How to start the Machine 1. Disassemble the filters system as Care programme instructed in this chapter.
  • Page 22 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
  • Page 23 ENGLISH toothpick, to remove particles of soil from the holes. 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.

  • Page 24: Troubleshooting

    (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 26 Problem and alarm code Possible cause and solution Technical malfunction of the • Switch the appliance off and on. appliance. The display shows iC0 or iC3. The level of water inside the • Switch the appliance off and on.
  • Page 27 ENGLISH Problem and alarm code Possible cause and solution The appliance is switched • Power supply is out of the operating range. The wash on but does not operate. cycle is temporarily interrupted and resumes automati‐ The display shows Power cally once the power is restored.
  • Page 28 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause.

  • Page 29: Technical Information

    ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 - 60 Water supply pressure...
  • Page 32 www.aeg.com/shop...

Table of Contents