Honeywell HF680 Series User Manual page 125

Aztec Append
This function allows the scanner to append the data from several Aztec barcodes
together before transmitting them to the host computer. When the scanner
encounters an Aztec barcode with the append trigger character(s), it buffers the
number of Aztec barcodes determined by information encoded in those barcodes.
Once the proper number of codes is reached, the data is output in the order
specified in the barcodes. There are 3 ways to scan appended Aztec Code:
•
•
•
Default = One Scan.
HF680 Series User Guide
One scan—Pull the trigger one time and all appended Aztec Codes in the same
image are decoded
Swipe—Pull and hold down the trigger and scan all appended Aztec Codes while
keeping the trigger pressed. The scanner emits short beeps for each partial
Aztec Code that is scanned and buffered. One long beep is emitted after the last
Aztec Code is scanned and the data is complete. Not compatible with
Presentation mode.
Point and shoot—Pull the trigger one time for each image. The scanner emits a
short beep for each partial Aztec Code that is scanned and buffered. One long
beep is emitted after the last Aztec Code is scanned and the data is complete.
Not compatible with Presentation mode.
* One Scan
Point and Shoot
Maximum Message Length
Swipe
Off
113