Table of Contents
Advertisement
ENGLISH
(Original instructions)
Do not place the cord under carpet,
♦
rugs or furniture. The unit is also
fitted with a tip over switch. Do not
use on thick and long pile carpets,
as the tip over switch may not been
activated.
If the supply cable is damaged,
♦
it must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
For optimal airflow circulation,
♦
leave a distance of at least 1 metre
around the appliance on every side.
Always direct the airflow in order
♦
to optimise heating. Avoid corners,
small objects and other surfaces
or objects which may impede the
airflow.
The appliance must be positioned
♦
so that the plug is accessible.
Always turn the appliance off and
♦
unplug it from the mains before
attempting to move it. Due to
the presence of hot parts, hold
the appliance only by the handle
provided.
WARNING: Do not place the unit
on or near a hot gas electric burner.
6
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
Always check that the mains voltage
corresponds to the voltage on the rating
plate.
♦
Appliance plugs must match the outlet. Never
modify the plug in any way.
♦
Do not use any adapter plugs with this appliance.
Unmodified plugs and matching outlets will reduce
the risk of electric shock.
♦
To avoid the risk of electric shock, do not immerse
the cord, plug or appliance in water or other liquid.
Extension cables & class 2 product
♦
A 2 core cable must be used as your tool is not
earthed.
♦
Up to 30m (100 ft) can be used without loss of
power.
♦
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
BLACK+DECKER Service Centre in order to avoid
a hazard.
Labels on Appliance
The following pictograms along with the date code
are shown on the appliance:
WARNING: Do not cover
WARNING: Before assembling, switch the
appliance off and remove the plug from the socket.
Advertisement
Table of Contents
