Panasonic Toughbook CF-19AHJAX1M Reference Manual page 38

Saving Power
Setup
1
Click [start] - [All Programs] - [Panasonic] - [Power Saving Utility].
2
Click [Enable] for each function.
Click [OK] in the confirmation screen that appears.
To enable "Intel video driver power saving function"
Select [Enable], and slide the slide bar to the "Maximum Battery" end.
3
Click [OK].
Click [Restore initial settings] to return to the factory default settings, and click [OK].
NOTE
Even if you can enable each function using power saving utility, you can also enable them as follows.
• For how to enable the Intel video driver power saving function.
Right-click the desktop and click [Graphics Properties]. The [Intel
A
screen appears.
Click [Notebook], [Apply] and [OK].
B
Click [Display Settings].
C
Click [Power Settings].
D
Click [Modify Settings].
E
Click [Intel(R) Display Power Saving Technology] to add a check mark.
F
Move the slide bar to [Maximum Battery] and click [OK].
G
Click [OK].
H
Click [start] - [Control Panel] and click [Other Control Panel Options] under [See Also] on the left side of the
A
screen and select [Intel(R) Graphics and Media].
Click [Power].
B
Click [Maximum Battery Life].
C
Click [Apply].
D
Click [OK].
E
• For how to enable/disable the Wake Up from wired LAN function (
®
Graphics Media Accelerator Driver for mobile]
page 83)
38