Table of Contents
Advertisement
30
Connecting
En
Connecting to Your TV
Note
Please refer to the manuals of your TV, stereo
system or other devices as necessary to make the
best connections.
Make sure the player is connected directly to the
TV. Tune the TV to the correct video input channel.
2
HDMI connection
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable
(High Speed HDMI
HDMI terminal on the player to the HDMI
terminal on a HDMI compatible TV or monitor.
HDMI
cable
Set the TV s source to HDMI (refer to TV s
Operating Instructions).
Caution
Connecting the player and the TV using the
HDMI cable alone does not enable you to hear
the audio from the devise. Please also connect
by either the optical cable (page 32) or the
analog audio cable (page 31).
When connected to a DVI device
It is not possible to connect DVI devices
(computer displays, for example) that are
not compatible with HDCP. HDCP is a
specification to protect audiovisual content
across the DVI HDMI interface.
No audio signals are output. Connect using
an audio cable, etc.
This player is designed for connection with
HDMI compatible devices. When connected
to a DVI device, it may not operate properly
depending on the DVI device.
®
Cable). Connect the
Rear of the unit
TV
Antenna connection
Connect the supplied antenna for listening to
the radio.
Rear of the unit
Note
After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
Advertisement
Table of Contents
