Page 2
All manuals and user guides at all-guides.com Connecting The DP-G310 To Your Network First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or switch.
Page 3
All manuals and user guides at all-guides.com Setting up your DP-G310 for network printing in Windows XP For additional Windows operating system setup or information on the web-management interface, refer to the manual located on the CD-ROM. The factory default IP address of the DP-G310 is 192.168.0.10. In order to net- work to the printer through the DP-G310, the DP-G310 must have the same IP network settings as your network.
Page 4
Setting up your DP-G310 for All manuals and user guides at all-guides.com network printing in Windows XP (continued) * Note:Please notice that if you connect your printer server in a LAN where a DHCP server is present. The IP address will differ from the one in the example 192.168.0.10.
Page 5
What is an SSID? A workgroup name of your Wireless Network. All wireless devices must all have the same SSID to communicate on the Wireless Network. All D-Link Wireless devices have the default SSID of default, all lower case. How does WEP Work? 64 bit WEP encryption uses a 10 hexidecimal character key.
Page 6
Setting up your DP-G310 for All manuals and user guides at all-guides.com network printing in Windows XP (continued) For Windows XP: Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control Panel> Printers and Faxes Double-click on the “Add Printer”...
Page 7
Setting up your DP-G310 for All manuals and user guides at all-guides.com network printing in Windows XP (continued) Select “Create a new port.” At the pull-down menu, highlight “Standard TCP/IP Port.” Click Next Click Next Type in the IP address of the print server.
Page 8
Setting up your DP-G310 for All manuals and user guides at all-guides.com network printing in Windows XP (continued) Select “Custom” Then click on Settings. Click Settings Select “LPR” Input the port name of the port being used by the PS-121B28-U1 printer Click Click...
Page 9
Setting up your DP-G310 for All manuals and user guides at all-guides.com network printing in Windows XP (continued) Click Finish In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.) Click on “Have Disk...”...
Page 10
All manuals and user guides at all-guides.com Setting up your DP-G310 for network printing in Windows XP (continued) Select “Yes” to print a test page Click Next Your Setup is Complete! The printer is now ready for printing with Windows XP, on your network.
Page 11
All manuals and user guides at all-guides.com...