System Connections; Connection To A Personal Computer - JVC GR-DVX507 Instructions Manual

78
EN

Connection To A Personal Computer

[A] Using USB or PC connection cable
Open the
connector
cover.
[B] Using DV cable
Open the
connector
cover.
[A] Using USB or PC connection cable
This camcorder can transfer still images to a PC by
using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
2
If you are using the USB connection, set the
VIDEO/MEMORY switch to "MEMORY".
(GR-DVX707/507 only)
3
Turn the camcorder's Power Switch to "P"
while pressing down the Lock Button located on
the switch and turn on the PC.
● Refer to the instruction manual of the software
on how to transfer a still image to the PC.
NOTES:
● Refer to "SOFTWARE INSTALLATION AND USB
OR PC CONNECTION GUIDE" for the installation
of the bundled software and drivers.
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack. (
GR-DVX407/400 only
To PC
PC connection cable (provided)
USB cable (provided)
To USB
GR-DVX707/507 only
OR
To DV
Core filter
pg. 11)

SYSTEM CONNECTIONS

To RS-232C
To USB connector
DV cable
connector
(optional)
Core filter
● Never connect the USB or PC connection cable
and the DV cable simultaneously to the
camcorder. Connect only the cable you wish to
use to the camcorder.
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC, or use the DV cable
provided with the capture board.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
For GR-DVX707/507 owners:
"USB MODE" and/or "ACCESSING FILES"
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILES" is displayed on the LCD
monitor since this can result in product damage.
PC
To DV
PC with DV
connector