Table of Contents
Advertisement
NLTroubleshooting
Malfunction
wrinkling.
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Detergent residue on
the damp laundry.
54
Cause and Troubleshooting
Inappropriate program set for the type of fabric.
Select a suitable program for the type of fabric.
▶
Low spin speed is set.
Set a higher spin speed for the next wash.
▶
Start the programCentrifuge.
▶
is activated.
Select a suitable program for the type of fabric.
▶
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
pinched.
Make sure that the drain pipe and the water
▶
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Start the programCentrifuge.
▶
Unbalance control system compensates for
imbalance through reduced spin speed.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Start the programCentrifuge.
▶
Detergents can contain water-insoluble substances,
which deposit on the laundry.
Start the programTo rinse.
▶
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
Check whether the detergent used is suitable.
1.
→ "Detergent and care agent", Page 33
Advertisement
Table of Contents
