Replacing Fuse - Yamaha F80AETL Owner's Manual

GB
EMU01330
w

REPLACING FUSE

If a fuse has blown, remove the electrical
cover, open the fuse holder and remove
t
the fuse with a fuse puller. Replace it with
a spare one of proper amperage.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
q
allow excessive current flow. This could
cause electrical system damage and a fire
w
hazard.
r
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Electrical cover
e
2 Fuse holder
F1043
3 Fuse (30A × 1, 20A × 1)
4 Spare fuse (30A, 20A)
5 Fuse puller
t
F1025E
4-20